Free drivers  
 
Search free drivers:
Category:
Search keyword:


Driver Scan
Driver type:
 
TOP DOWNLOADS:
 
 
SUGGESTIONS:
If you are requiered for more information about HP iPAQ hx4700 driver, follow links:
Search HP iPAQ hx4700 driver at Google
Search HP iPAQ hx4700 driver at Yahoo
 
 Information about drivers
Main page PDA drivers HP drivers iPAQ hx4700 driver
 

HP iPAQ hx4700 driver

  There are HP iPAQ hx4700 drivers available for free downloading on this page. Choose the driver you need according to your operating system. Be attentively, because some drivers for HP iPAQ hx4700 can be used only with one operating system! The HP iPAQ hx4700 drivers can differentiate in version. If you can't find it in this list, you can ask us to look for it. Also we recommend you to use our forum to discuss the driver problems arisen during the installation of the driver.
 
HP iPAQ hx4700 Firmware
OS: n/a
 Description for HP iPAQ hx4700 Firmware:

HP iPAQ hx4700 Pocket PC Series Firmware Update for ROM Version 1.10
  • IMPORTANT:
  • Please observe the following restrictions:
  • Do not attempt to Power Off or restart the handheld while the update is in progress.
  • After applying a firmware (ROM) update, do not attempt to restore a backup that was made before the ROM update was installed.
  • Do not enable the device password feature during the update process.
  • Do not enable the owner information to be displayed when the device is powered on during the update process. To disable this feature, click “Owner” on the Today screen, tap the "Options" tab, and uncheck the box beside "Identification information."
  • If an error message is displayed during the update process, follow any available instructions to correct the condition and start the update again.
  • The update process can be performed while connected to a host PC either as a Guest or with an established partnership.
  • IMPORTANT:
  • Disable the Standby and Hibernation modes on the host PC. If Standby or Hibernation mode is activated during the upgrade process, a critical error may occur.
  • IMPORTANT:
  • Do not interact with the handheld or remove it from AC power or from the cradle/cable once the hourglass is displayed on the handheld and the actual firmware update has started.
    Fixes

  • Fixes issue where the handheld fails to reconnect with a WPA-TKIP encryption network.
  • Fixes issue where the handheld is unable to connect with a WPA-PSK encryption network with Cisco access points.
  • Fixes issue where "Turn on flight mode" option is not available under the Connectivity pop-up window.
  • Fixes issue where the sound quality of a recording is not normal after an alarm event.
  • Fixes issue where a third-party audio application stops responding.
  • Fixes the following localization issues:
  • Japanese: Corrects translation and incorrect characters that were displayed in the ClearVue PDF Viewer Help file.
  • Japanese: Corrects translation issue in the Backlight Help file.
  • Japanese: Corrects incorrect information that was given in the Screen Help file.
  • Japanese: Corrects display format issue in HP Image Zone Help file.
  • Japanese: Corrects incorrect characters displayed in the Help, Settings file.
  • Japanese: Corrects translation issue in iPAQ Audio application.
    Enhancements

  • Enables auto execution after a hard reset.
    Prerequisites

  • ROM version 1.10 must be installed on the handheld before installing this SoftPaq.
    Notes

  • PURPOSE:
  • RecommendedOPERATING SYSTEM(S):
  • Microsoft Windows for Pocket PC 2003SE
  • NOTE:
  • When prompted, be sure to respond Yes to installing the files in the default location on the iPAQ handheld. Installing the files in an alternate location will prevent the application from running.
  • If this SoftPaq is installed, there is no need to install SoftPaq Number SP30731, "HP iPAQ hx4700 Pocket PC Series Audio Driver Update," as this SoftPaq includes the changes provided in SoftPaq Number SP30731.
  • This XIP firmware update does not change the ROM version. To confirm that the XIP firmware update was successful, check the XIP version number.To check the XIP version number, tap Start, then tap Settings, then tap the System tab, then tap the HP Asset Viewer icon, and then tap the Version tab. The XIP version is the last entry in the list. If this update has been successfully installed, the new XIP version number will be 4.21.15045.7.
  • JAPANESE iPAQ UNITS ONLY: This SoftPaq installs two XIP updates for Japanese iPAQ units, one after the other. If this update has been successfully installed, the new XIP version number will be 4.21.15045.9.
  • If the sound quality of a recording is still not normal after an alarm event, tap Start, then tap Settings, then tap System, then tap iPAQ Audio, and then tap Mic and uncheck/check the "Enable AGC" setting.
    Installation

    HOW TO USE:
    1. Download the SoftPaq .EXE file to a directory on your hard drive.
    2. Execute the downloaded file and follow the on-screen directions.

    Download HP iPAQ hx4700 Firmware
    • Version: 1.10
    Public date: September 16, 2005
    HP iPAQ hx4700 Firmware
    OS: n/a
    		 Description for HP iPAQ hx4700 Firmware:

    HP iPAQ hx4700 Pocket PC Series ROM Update
  • PLEASE NOTE:
  • After this ROM update has been installed, it is also necessary to install the HP iPAQ hx4700 Pocket PC Series Firmware Update for ROM Version 1.10 to restore the extended battery capacity value to its original, setting.If the Firmware Update is not currently available for your language, please do not install this ROM update if you are using the extended battery.
  • For the Korean Language Version Only:The extended battery capacity value issue is not affected.
  • IMPORTANT:
  • The RUU is designed to replace the current ROM image and to erase the partnership and all user data and programs on the handheld.It is important to read and understand the information in the Readme file that is included with this update BEFORE installing the package.
    Fixes

  • Fixes issues with wireless connectivity.
  • Fixes issue with execution of .NET framework.
  • Fixes issue with very high-volume audio signal from third-party applications that could result in potential speaker damage.
  • Fixes issue where the microphone automatic gain control (AGC) setting was not saved after a power cycle.
  • Fixes issue where the user interface for the handheld would indicate that the user was connected to a network that was not present.
  • Fixes issue where protected extensible authentication protocol (PEAP) authentication would fail with no indication that the user's password had expired.
  • Fixes issue where Pocket Internet Explorer would stall and fail to load a page if the HTTP post was larger than 16K.
  • Fixes issue where WiFi connection status was incorrectly indicated for some conditions.
  • Fixes issue with an active modem connection where the handheld was unable to re-establish a connection after the USB cable was unplugged.
  • Fixes issue that occurred when using WPA-PSK authentication where the handheld failed to authenticate to a second access point (AP) with the same SSID and key.
  • Fixes issue where the client device packets did not properly route to the target LAN when a point-to-point protocol (PPP) connection was made.
  • Fixes issue where an exception was generated When disconnecting a serial line Internet protocol (SLIP) server session.
  • Fixes issue where the wrong domain name server (DNS) address was passed to the server when a secondary IP address was assigned.
  • Fixes issue where the wrong WEP key was used when switching between configured, preferred, WEP-enabled Wi-Fi connections.
  • Fixes issue with cached pages where a back/forward navigation would not be sent to the Internet.
  • Fixes issue with URLs that contain semicolons so that they are no longer truncated when sending the GET request over the Wireless Session Protocol.
  • Fixes the following localization issues:
  • Korean: Fixes issue with contact picker where it did not match Jungseong because asterisk (*) and pound sign (#) key presses were ignored.
  • Korean: Fixes issue with contact names that were displayed with no comma or space between the Last and First name.
  • Korean: Fixes issue with the Notification dialog so it is no longer clipped in the Sounds and Notifications Control panel.
  • Romanian: Corrects Daylight Savings Time.
    Enhancements

  • Provides an improved Microsoft Pocket Internet Explorer.
  • Provides an improved Microsoft Windows Media Player.
  • Enables more than one Settings application to be active at the same time.
  • Adds new data connectivity icon to the Title bar.
  • Improves ServerSync application stability.
  • Enables dialing of a number that starts with a pound sign (#).
  • Enhances localization, including:
  • Traditional Chinese: Improves Wi-Fi settings "Zero Config" dialog box.
  • Japan: Improves Wi-Fi settings.
  • Korean: Updates the Lunar calendar.
  • Enables the pound sign (#) and asterisk (*) to be used in the Contacts application search function.
    Prerequisites

  • Microsoft ActiveSync 3.7.1 (or later) is required.
    Notes

  • PURPOSE:
  • Recommended
  • OPERATING SYSTEM(S):
  • Microsoft Windows for Pocket PC 2003 SE
  • NOTE:
  • Once the update is complete, the .EXE file downloaded in Step 1 can be deleted, if desired.
    Installation

    HOW TO USE:
    1. Download the SoftPaq .EXE to a directory on your hard drive.
    2. Execute the downloaded file and follow the on-screen instructions to unpack the ROM update files to a directory. (NOTE: This directory should not contain any file or folder from any previous ROM upgrade.)
    3. Establish an Activesync connection between the handheld and host PC using the USB connection.
    4. The ROM Update Utility (hpRUU.exe) will start automatically. Follow the on-screen instructions to complete the ROM upgrade.
    INSTALLATION NOTES:
    1. During the update, the ROM Update Utility will:
    2. Query the handheld for current ROM image information.
    3. Validate that the new ROM image is compatible with the handheld.
    4. Automatically place the handheld in Flash mode.
    5. Update the ROM image on the handheld.
    6. IMPORTANT: Disable the Standby and Hibernation modes on the host PC. If Standby or Hibernation mode is activated during the upgrade process, a critical error may occur.
    7. IMPORTANT: Plan enough time to complete the update. The total time to perform this ROM update is estimated at 20 minutes with a USB connection.
    8. IMPORTANT: Do not interact with the handheld or remove it from AC power or the cradle/cable once the status bar appears on the handheld and the actual update has started.
    9. For the Korean Language Version Only: The iPAQ Pocket PC battery capacity value issue is not affected.
    10. If an error message is displayed during the update process, follow any available instructions to correct the condition and start the ROM Update Utility again.
    11. If the host PC is running the Microsoft Windows 98 Second Edition (SE) or Microsoft Windows Millennium Edition (ME) Operating System and the ROM update process is interrupted, the host PC may need to be restarted.
    12. The update process can be performed while connected to a host PC either as a Guest or with an established partnership.

    Download HP iPAQ hx4700 Firmware
    • Version: 1.10
    Public date: May 10, 2005
    HP iPAQ hx4700 Firmware
    OS: n/a
    		 Description for HP iPAQ hx4700 Firmware:

    HP iPAQ hx4700 Pocket PC Series Audio Driver Update
  • Fixes issue where the sound quality of a recording is not normal after an alarm event.
  • Fixes issue where a third-party audio application stops responding.
    Prerequisites

  • Microsoft ActiveSync 3.7 (or later) is required.
    Notes

  • PURPOSE:
  • Recommended
  • OPERATING SYSTEM(S):
  • Microsoft Pocket PC 2003 SE
  • NOTE:
  • Downloading and extracting the SoftPaq files to the root directory, that is C:\, may generate an error. To avoid this potential issue, specify a download location other than C:\ or choose one of the default locations.

    Installation

    HOW TO USE:
    1. Download the SoftPaq .EXE file to a directory on your hard drive.
    2. Execute the downloaded file and follow the on-screen instructions to unpack the files.
    3. Establish an Activesync connection between the handheld and host PC.
    4. Execute the downloaded file and follow the on-screen instructions. If asked to replace a file, select "Yes" or "Yes to All."
    5. When the installation is complete, perform a normal reset on the handheld.

    Download HP iPAQ hx4700 Firmware
    • Version: 1.10
    Public date: July 28, 2005
    HP iPAQ hx4700 Firmware
    OS: n/a
    		 Description for HP iPAQ hx4700 Firmware:

    HP iPAQ Bluetooth Keyboard Driver Update
  • Microsoft ActiveSync 3.7 (or later).
    Notes

  • PURPOSE:
  • Routine
  • OPERATING SYSTEM(S):
  • Microsoft Pocket PC 2003
  • Microsoft Pocket PC 2003SE
    Installation

    HOW TO USE:
    1. Download the SoftPaq .EXE file to a directory on your hard drive.
    2. Establish an ActiveSync connection between the handheld and host PC.
    3. Execute the downloaded file and follow the on-screen instructions. If asked to replace a file, please choose "yes" or "yes to all".
      NOTE: Do not extract the files in the root directory. Use the default folder if possible.(C:\IPAQ\SP29865)
    4. When the installation is complete, perform a normal reset on the handheld.

    Download HP iPAQ hx4700 Firmware
    • Version: 1.0.0.1
    Public date: February 23, 2005
    HP iPAQ hx4700 Firmware
    OS: n/a
    		 Description for HP iPAQ hx4700 Firmware:

    HP iPAQ Foldable Keyboard Driver Update
  • Adds support for the Microsoft Pocket PC 2003SE Operating System.
    Prerequisites

  • Microsoft Pocket PC 2002 or Microsoft Pocket PC 2003.
    Notes

  • PURPOSE:
  • Routine
  • OPERATING SYSTEM(S):
  • Microsoft Pocket PC 2002
  • Microsoft Pocket PC 2003
  • Microsoft Pocket PC 2003SE
    Synchronization Software

  • Microsoft ActiveSync 3.5 or later
    Installation

    HOW TO USE:
    1. Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.
    2. Establish an Activesync connection between your iPAQ Pocket PC and host PC.
    3. Execute the downloaded file and follow the on-screen instructions.
    4. Perform a normal reset on the iPAQ Pocket PC.

    Download HP iPAQ hx4700 Firmware
    • Version: 4.03
    Public date: February 4, 2005
    HP iPAQ hx4700 Firmware
    OS: n/a
    		 Description for HP iPAQ hx4700 Firmware:

    HP iPAQ hx4700 Pocket PC Series German BT Phone Manager Update
  • Fixes issue where the BT Phone Manager does not execute after the LiveUpdate.
    Prerequisites

  • Microsoft ActiveSync 3.7 (or later) is required.
    Notes

  • PURPOSE:
  • Recommended
  • OPERATING SYSTEM(S):
  • Microsoft Pocket PC 2003 SE
  • NOTE:
  • Downloading and extracting the SoftPaq files to the root directory, that is C:\, may generate an error. To avoid this potential issue, specify a download location other than C:\ or choose one of the default locations.
    Installation

    HOW TO USE:
    1. Download the SoftPaq .EXE file to a directory on your hard drive.
    2. Execute the downloaded file and follow the on-screen instructions to unpack the files.
    3. Establish an Activesync connection between the handheld and host PC.
    4. Execute the downloaded file and follow the on-screen instructions. If asked to replace a file, select "Yes" or "Yes to All."
    5. When the installation is complete, perform a normal reset on the handheld.

    Download HP iPAQ hx4700 Firmware
    • Version: 2.28
    Public date: April 20, 2005
     
    If you still had any questions concerning search, uploading or installations HP iPAQ hx4700 driver, use our form of feedback. As far as possible we shall answer all your questions. For reception of more detailed information about HP iPAQ hx4700 driver accessible to free download, choose the model of your device.
    Term of use :: Privacy Policy
    © 2005 Copyright DriverStock.com All right reserved