|
| SUGGESTIONS: |
|
If you are requiered for more information about HP iPAQ h6315 driver, follow links:
|
|
| |
HP iPAQ h6315 driver |
|
Quickly See if Your System Needs Driver Updates
Updating Your Drivers is as Easy as 1, 2, 3! |
|
|
|
|
| |
There are HP iPAQ h6315 drivers available for free downloading on this page.
Choose the driver you need according to your operating system. Be attentively, because some drivers for
HP iPAQ h6315 can be used only with one operating system!
The HP iPAQ h6315 drivers can differentiate in version. If you can't find it in this list, you can ask us to look for it. Also we recommend you to
use our forum to discuss the driver problems arisen during the installation of the driver.
|
| |
 |
HP iPAQ h6315 Firmware |
|
OS: n/a
|
Description for HP iPAQ h6315 Firmware:
HP iPAQ h6300 Pocket PC Series ROM Update (English Languages Support Only)
GSM Firmware version 541d Update:Fixes issue where dual-tone multi-frequency (DTMF) did not work with interactive voice response (IVR) systems.Fixes GSM/GPRS settings to handle connectoid name with more than 20 characters.
Fixes issue where Inbox attachments from certain ISPs were unable to be sent over the GPRS connection.
Wireless LAN Driver build 62:Fixes issue that occurred with tunneled transport layer security (TTLS) server certificate validation.
Fixes unrecognizable characters that were displayed during login when using TTLS with MS-CHAP2.
Fixes LEAP authentication to redisplay login prompt after tapping Cancel.
Changes display name to "HP iPAQ Wi-Fi Wireless Adapter."Bluetooth build 1.0.0.3701:
Fixes inaccurate display of headset icon when a call is in progress.Adds a check to determine if Bluetooth stack is initialized before accepting messages from phone.
Adds a user interface (UI) change to enable a connected headset to automatically disconnect before attempting to connect to a different headset when the user chooses to connect to a second headset.
Fixes check for invalid device name.Fixes issue where handheld could not reconnect to remote device after a page timeout.
Fixes Object push profile update so it sends all files.Updates FTP connection wizard to correct service discovery issue.Fixes issue with call waiting for incoming call handling while dialing out.
Fixes issue with headset connection icon so it is correctly displayed after power cycling.Fixes audio to make it compatible with an in-car solution.Fixes audio issue where the right channel for a headset was unavailable for playing audio and during calls.Fixes issue where the LED and network status were not properly synchronized.Fixes issue where the user could not send multimedia messaging (MMS) message.
Enhancements
Provides GSM Firmware version 541d Update, which:Supports 64KB SIM cards.Improves call handling.Improves reception.
Provides Wireless LAN Driver build 62, which:
Improves reception and roaming.
Extends the maximum length of lightweight extensible authentication protocol (LEAP) username and password to 63 characters.Provides Bluetooth Software version 1.0.0.3701, which:
Improves headset compatibility.
Improves headset reconnection when returning into service area.
Adds support for Siemens car adapter kit.
Enables pairing using 16-character PIN code.
Increases the paging-pool size from 4 MB to 6 MB.
Activates echo cancellation for wired headset.
Prerequisites
Microsoft ActiveSync 3.7.1 (or later) is required.
Notes
PURPOSE:RecommendedOPERATING SYSTEM(S):Microsoft Windows Mobile for Pocket PC Phone Edition 2003NOTE:Use Microsoft ActiveSync to synchronize the personal information manager(PIM) data with Microsoft Outlook on a desktop and to save a copy of user data, if any, before performing the ROM update. After completing the ROM update, establish a new ActiveSync partnership with the desktop. The handheld will be synchronized with the PIM data from Outlook. Reinstall any user-installed programs and user data, if necessary.
Because of changes in the registry and system files introduced by the new ROM, the new ROM will not recognize a backup file generated using the previous ROM.
Installation
HOW TO USE:- Download the SoftPaq .EXE to a directory on your hard drive.
- Execute the downloaded file and follow the on-screen instructions to unpack the ROM Update files to a directory. (NOTE: This directory should not contain any file or folder from any previous ROM Upgrade.)
- Establish an Activesync connection between the handheld and host PC using the USB connection.
- RUN.exe will start automatically. Follow the on-screen instructions to complete the ROM upgrade.
INSTALLATION NOTES:
- During the update, the ROM Update Utility will:
- Query the handheld for current ROM image information.
- Validate that the new ROM image is compatible with the handheld.
- Automatically place the iPAQ handheld in Flash mode.
- Update the ROM image on the handheld.
- IMPORTANT: Disable the Standby and Hibernation modes on the host PC. If Standby or Hibernation mode is activated during the upgrade process, a critical error may occur.
- IMPORTANT: Plan for enough time to complete the update. The total time to perform this ROM update is estimated at 20 minutes with a USB connection.
- IMPORTANT: Do not interact with the handheld or remove it from AC power or the cradle/cable once the status bar appears on the handheld and the actual update has started.
- If an error message is displayed during the process, follow any available instructions to correct the condition and start the ROM Update Utility again.
- The update process can be performed while connected to a host PC either as a Guest or with an established partnership.
Download HP iPAQ h6315 Firmware
|
Version: 1.10.08
|
Public date: March 31, 2005
|
|
|
|
HP iPAQ h6315 Firmware |
|
OS: n/a
|
Description for HP iPAQ h6315 Firmware:
HP iPAQ h6300 Pocket PC Series Wireless LAN Driver Update
IMPORTANT:This update can only be installed on ROM version 1.10.08. Please update the handheld with ROM 1.10.08 before installing this driver update. To obtain ROM version 1.10.08, please visit http://www.hp.com.
Fixes
Provides Wireless LAN Driver build 63, which fixes the following issues:
Fixes issue with TCP/IP rebinding that occurs after a suspend/resume when using AnthaVPN.
Fixes issue with automatic authentication during roaming.
Fixes issue with "memory leakage" when handheld is roaming.
Fixes issue where handheld will not enter Sleep mode while roaming.
Fixes issue where roaming fails due to an incorrect BSSID list.
Enhancements
Provides support for third-party intermediate Wireless LAN driver.
Provides driver that has completed all required certification testing.
Prerequisites
ROM Version 1.10.08
Microsoft ActiveSync 3.7 (or later)
Notes
PURPOSE:RecommendedOPERATING SYSTEM(S):Microsoft Windows Mobile for Pocket PC Phone Edition 2003.NOTE:This XIP firmware update does not change the ROM version. To confirm that the XIP update was successful, check for Wireless LAN Driver version number 2.00.49.63 in the HP Asset Viewer. To view the version number, tap Start, Settings, System, HP Asset Viewer, and Wi-Fi.
Installation
HOW TO USE:- Download the SoftPaq .EXE file to a directory on your hard drive.
- Establish an Activesync connection between the handheld and host PC through the USB connection.
- Execute the downloaded file and follow the on-screen instructions to complete the update.
Download HP iPAQ h6315 Firmware
|
Version: 2.00.49.63
|
Public date: June 20, 2005
|
|
|
|
| |
If you still had any questions concerning search, uploading or installations
HP iPAQ h6315 driver, use our form of feedback. As far as
possible we shall answer all your questions. For reception of more detailed
information about HP iPAQ h6315 driver accessible
to free download, choose the model of your device. |
|
Home
SiteMap
Testimonials
Forum
Links
Contact us
