Free drivers  
 
Search free drivers:
Category:
Search keyword:


Driver Scan
Driver type:
 
TOP DOWNLOADS:
 
 
SUGGESTIONS:
If you are requiered for more information about HP iPAQ h5550 driver, follow links:
Search HP iPAQ h5550 driver at Google
Search HP iPAQ h5550 driver at Yahoo
 
 Information about drivers
Main page PDA drivers HP drivers iPAQ h5550 driver
 

HP iPAQ h5550 driver
Quickly See if Your System Needs Driver Updates
Updating Your Drivers is as Easy as 1, 2, 3!



  There are HP iPAQ h5550 drivers available for free downloading on this page. Choose the driver you need according to your operating system. Be attentively, because some drivers for HP iPAQ h5550 can be used only with one operating system! The HP iPAQ h5550 drivers can differentiate in version. If you can't find it in this list, you can ask us to look for it. Also we recommend you to use our forum to discuss the driver problems arisen during the installation of the driver.
 
HP iPAQ h5550 Firmware
OS: n/a
 Description for HP iPAQ h5550 Firmware:

HP iPAQ Pocket PC h5500 Series Firmware Update
  • Fingerprint Software Version 3.7:
    * Corrects where it allowed to select alphanumeric characters using the softkey with the "simple 4 digit PIN" option for Password.
    * Corrects the 12 and 24 hours option where it could not be selected in the "Prompt if device unused for" field under Password.
  • Bluetooth Driver Version 1.4.1.58:
    * Corrects problem where system would hang when disconnecting a PAN connection via the Incoming Connection icon.
    * Corrects a problem where the device needed a Normal Reset after being turned off while transferring data via SPP, for example, while connected to a Bluetooth GPS device.
    * Corrects the proxy settings getting erased in the Bluetooth Settings.
    * Corrects a problem when using 'Dial via Bluetooth' which would not accept spaces in the phone number.
  • Corrects an issue where the iPAQ unit does not waking up to perform a scheduled iPAQ Backup.
  • Restore ClearType Tuner that was removed by the previous XIP update (English and German only).
    Enhancements

  • Wireless LAN Driver Version 3.2.2.123:
    * Improves Connectivity and Roaming ability for wireless LAN users.
    Prerequisites

  • Microsoft ActiveSync 3.7 or later
    Synchronization Software

  • Microsoft ActiveSync 3.7 or later
    Installation

    HOW TO USE:

    1. Download the SoftPaq to a directory on your hard drive.The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.

    2. Establish an Activesync connection between your iPAQ Pocket PC and host PC through either the USB or Serial connection.

    3. Execute the downloaded file and follow the on-screen instructions to install the iPAQ Pocket PC h5500 series Firmware Update.


    INSTALLATION NOTES:

    1. Important: Please ensure you have completed the following tasks:

    2. Do not enable the device password feature during the update process.

    3. Do not attempt to turn off or restart the device while the update is
      in progress.

    4. Do not enable “Show information when device is turned on” feature during the update process. To disable, simply click “Owner” on the today screen and uncheck the box at the bottom of the page, then click the “Notes” tab at the bottom of the page and uncheck “Show information when device is turned on” located at the bottom of the page.

    5. After applying a ROM update, do not attempt to restore a backup that was made before the ROM update was installed.

    6. Important: Disable the standby and hibernation modes on your host PC.If standby or hibernation are activated during the upgrade process, a critical error may occur.

    7. Important: Plan for enough time to start and complete the update process.The total time to perform a ROM backup and a ROM update is estimated to be as follows:

      * USB - 5 minutes
      * Serial - 30 minutes

    8. Important: Do not interact with your device or remove it from AC power or the cradle/cable once the hour glass appears on the iPAQ and the actual update has started.

    9. If an error message is displayed during the process, follow any available instructions to correct the condition and start the utility again.

    10. The update process can be performed while connected to a host PC as a Guest or with an established partnership.


    Download HP iPAQ h5550 Firmware
    • Version: 1.00.18
    Public date: November 19, 2003
    HP iPAQ h5550 Firmware
    OS: n/a
    		 Description for HP iPAQ h5550 Firmware:

    HP iPAQ Pocket PC h5500 Series Firmware Update for ROM Version 1.10
  • This XIP update is designed to replace the Miscellaneous OEM region of the ROM image. It is important to read and understand the information in the Readme.txt file included with this update BEFORE installing this package.

  • This XIP update is for English and German languages only. ROM update version 1.10 for all other languages already contains these fixes.
    Fixes

  • Corrects an issue where the Dual-Slot PC Card Expansion Pack does not initialize after a soft reset when two PCMCIA cards are installed.
  • Corrects the following issues with the SDIO Driver:
  • Corrects issue where some SDIO cards were not recognized after Suspend/Resume or soft reset.
  • Corrects issue where the handheld did not enter Suspend mode if select SDIO cards were present.
  • Corrects issue where some SDIO cards continued to draw power while in Suspend mode.
    Prerequisites

  • Microsoft ActiveSync 3.7 or later.
  • SoftPaq SP27674 must be installed on the handheld before this SoftPaq can be installed.
    Notes

  • PURPOSE:
  • Recommended
  • OPERATING SYSTEM(S):
  • Microsoft Pocket PC 2003
    Synchronization Software

  • Microsoft ActiveSync 3.7 or later
    Installation

    HOW TO USE:

    1. Download the SoftPaq .EXE file to a directory on your hard drive.

    2. Establish an Activesync connection between the iPAQ Pocket PC and host PC using either a USB or Serial connection.

    3. Execute the downloaded file and follow the on-screen instructions.



    INSTALLATION NOTES:

    1. If the Regional Settings are changed to any language other than the default language of the handheld, the Firmware update will not complete and the following error message will be generated: "This update is language specific. Please visit the HP website to verify that you have downloaded the correct update."

    2. IMPORTANT: Please observe the following restrictions:
    3. Do not enable the handheld password feature during the update process.
    4. Do not attempt to Power Off or restart the handheld while the update is in progress.
    5. Do not enable the "Show information when device is turned on" feature during the update process. To disable this feature, click "Owner" on the Today screen and uncheck the box at the bottom of the page, then click the Notes tab at the bottom of the page and uncheck "Show information when device is turned on," which is located at the bottom of the page.
    6. After applying a firmware (ROM) update, do not attempt to restore a backup that was made before the ROM update was installed.

    7. IMPORTANT: Disable the Standby and Hibernation modes on the host PC. If Standby or Hibernation mode is activated during the upgrade process, a critical error may occur.

    8. IMPORTANT: Plan enough time to complete the update process. The total time to perform the firmware update is estimated to be as follows:
    9. For USB connection - 10 minutes
    10. For Serial connection - 20 minutes

    11. IMPORTANT: Do not interact with the handheld or remove it from AC power or from the cradle/cable once the hourglass appears on the handheld and the actual firmware update has started.

    12. If an error message is displayed during the update process, follow any available instructions to correct the condition and start the update again.

    13. The update process can be performed while connected to a host PC either as a Guest or with an established partnership.

      NOTE: This XIP firmware update does not change the ROM version. To confirm that the XIP firmware update was successful, check for a date of 6/22/04 on the mxip_MISC.ver file by pressing Start, Programs, File Explorer, and Windows directory. The mxip_MISC.ver file can only be view with the "View All Files" option selected. To set the "View All Files" option, tab and hold on the blank area at the bottom of the File Explorer window.

    Download HP iPAQ h5550 Firmware
    • Version: 1.10
    Public date: August 23, 2004
    HP iPAQ h5550 Firmware
    OS: n/a
    		 Description for HP iPAQ h5550 Firmware:

    HP iPAQ Pocket PC h5500 Series ROM Update
  • Connectivity:
  • Enables connectivity bubble to correctly display GPRS status when connected through a proxy.
  • Fixes the JavaScript event handler to operate correctly.
  • Enables Microsoft Pocket Internet Explorer to use cached pages when offline, even for local servers.
  • Contacts: Removes duplicate radio telephone number from Contacts List view.
  • Inbox:
  • Short messages are not duplicated.
  • SMS messages with alphanumeric addresses are parsed correctly.
  • Localization: Errant character is no longer inserted by Action button on KOR.
  • Settings: Handheld properly returns to Power Off state after an alarm.
    Enhancements

  • Adds SDIO driver update for:
  • SDIO camera
  • Socket scanner
  • Reduces power consumption while in Hibernation mode.
  • Includes Bluetooth build 1.4.1.60.
  • Removes currency calculator.
  • Includes wireless LAN driver update build 3.2.4.130.
  • Connectivity:
  • Adds ability to configure Accept header for Microsoft Pocket Internet Explorer.
  • Adds ability to connect with IEEE 802.1x to Microsoft Windows 2003 Server with PEAP fast reconnect enabled.
  • Enables Microsoft Pocket Internet Explorer to use cached pages when offline, even for local servers.
  • Improves wireless connectivity technologies.
  • Contacts: Sorts contacts according to the Country selected in Regional Settings.
  • Inbox: Clarifies location of SMS inbox.
  • Instant Messenger: Adds IM sign in.
  • Localization:
  • Adds ability to enter full IP address for DNS entry in Spanish.
  • Adds ability to save contacts with Far East characters in both first and last names.
  • Adds ability to use partial Cyrillic name to find contacts.
  • KOR keyboard now allows for '~' character.
  • Settings: Enables CHT owner information to be shown on Power-On.
  • Shell:
  • Improves USB reliability.
  • Adds use of high-quality MIDI playback for alarms and meeting reminders.
  • Improves data integrity when file system is nearly full.
    Prerequisites

  • Microsoft ActiveSync 3.7 or later
    Notes

    Purpose

  • Recommended
    Operating System(s)

  • Microsoft Windows for Pocket PC 2003
    Synchronization Software

  • Microsoft ActiveSync 3.7 or later
    Installation

    HOW TO USE:

    1. Download the SoftPaq to a directory on your hard drive.The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.

    2. Execute the downloaded file and follow the on-screen instructions to unpacking the ROM Update files to a directory (NOTE: this directory should not contain any file or folder from any previous ROM Upgrade).

    3. Establish an Activesync connection between your iPAQ Pocket PC and host PC through either the USB or Serial connection.

    4. Execute the RUU.exe file in the directory created in step 2 above to begin the upgrade process and follow the instructions displayed by the ROM Upgrade Utility.

    5. You may delete the self-extracting file downloaded in step 1 if you wish.

      INSTALLATION NOTES:

      1. During the update, the ROM Update Utility will:
        - Query your device for current ROM image information.
        - Validate that the new ROM image is compatible with your device.
        - Automatically place the iPAQ in flash mode.
        - Update the ROM image on your device.
        - Require that you press Reset at the end which performs a Full reset to complete the process.

      2. Important: Disable the standby and hibernation modes on your host PC. If standby or hibernation are activated during the upgrade process, a critical error may occur.

      3. Important: Plan for enough time to start and complete the update process. The total time to perform a ROM backup and a ROM update is estimated to be as follows:
        *USB - 20 minutes
        *Serial - 90 minutes

      4. Important: Do not interact with your device or remove it from AC power or the cradle/cable once the status bar appears on the iPAQ and the actual update has started.

      5. If an error message is displayed during the process, follow any available instructions to correct the condition and start the utility again.

      6. The update process can be performed while connected to a host PC as a Guest or with an established partnership.

      Download HP iPAQ h5550 Firmware
    • Version: 1.10
    Public date: April 7, 2004
    HP iPAQ h5550 Firmware
    OS: n/a
    		 Description for HP iPAQ h5550 Firmware:

    HP iPAQ Bluetooth Keyboard Driver Update
  • Microsoft ActiveSync 3.7 (or later).
    Notes

  • PURPOSE:
  • Routine
  • OPERATING SYSTEM(S):
  • Microsoft Pocket PC 2003
  • Microsoft Pocket PC 2003SE
    Installation

    HOW TO USE:
    1. Download the SoftPaq .EXE file to a directory on your hard drive.
    2. Establish an ActiveSync connection between the handheld and host PC.
    3. Execute the downloaded file and follow the on-screen instructions. If asked to replace a file, please choose "yes" or "yes to all".
      NOTE: Do not extract the files in the root directory. Use the default folder if possible.(C:\IPAQ\SP29865)
    4. When the installation is complete, perform a normal reset on the handheld.

    Download HP iPAQ h5550 Firmware
    • Version: 1.0.0.1
    Public date: February 23, 2005
    HP iPAQ h5550 Firmware
    OS: n/a
    		 Description for HP iPAQ h5550 Firmware:

    HP iPAQ Foldable Keyboard Driver Update
  • Adds support for the Microsoft Pocket PC 2003SE Operating System.
    Prerequisites

  • Microsoft Pocket PC 2002 or Microsoft Pocket PC 2003.
    Notes

  • PURPOSE:
  • Routine
  • OPERATING SYSTEM(S):
  • Microsoft Pocket PC 2002
  • Microsoft Pocket PC 2003
  • Microsoft Pocket PC 2003SE
    Synchronization Software

  • Microsoft ActiveSync 3.5 or later
    Installation

    HOW TO USE:
    1. Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.
    2. Establish an Activesync connection between your iPAQ Pocket PC and host PC.
    3. Execute the downloaded file and follow the on-screen instructions.
    4. Perform a normal reset on the iPAQ Pocket PC.

    Download HP iPAQ h5550 Firmware
    • Version: 4.03
    Public date: February 4, 2005
    HP iPAQ h5550 Firmware
    OS: n/a
    		 Description for HP iPAQ h5550 Firmware:

    HP Photosmart Mobile Camera Driver and iPAQ Image Zone
  • For the iPAQ Pocket PC h3900 Series with Pocket PC 2002, update the ROM to the latest version that has SDIO support in order for the camera to function properly.
    Notes

  • This is an initial release.
    Synchronization Software

  • Microsoft ActiveSync 3.5 or later
    Installation

    HOW TO USE:

    1. Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.

    2. Establish an Activesync connection between your iPAQ Pocket PC and host PC.

    3. Execute the downloaded file and follow the on-screen instructions.

    4. Perform a normal reset on the iPAQ Pocket PC.

    Download HP iPAQ h5550 Firmware
    • Version: 1.00.01
    Public date: January 8, 2004
    HP iPAQ h5550 Firmware
    OS: n/a
    		 Description for HP iPAQ h5550 Firmware:

    iPAQ Micro Keyboard Driver Update
  • Adds support for Pocket PC 2003.
    Prerequisites

  • Microsoft Pocket PC 2002 or Microsoft Windows Mobile 2003 for Pocket PC.
    Synchronization Software

  • Microsoft ActiveSync 3.5 or later.
    Installation

    HOW TO USE:

    1. Download the SoftPaq to a directory on your hard drive.The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.

    2. Establish an Activesync connection between your iPAQ Pocket PC and host PC.

    3. Execute the downloaded file and follow the on-screen instructions.

    4. Perform a normal reset on the iPAQ Pocket PC.

    Download HP iPAQ h5550 Firmware
    • Version: 3.03
    Public date: July 10, 2003
    HP iPAQ h5550 Firmware
    OS: n/a
    		 Description for HP iPAQ h5550 Firmware:

    iPAQ Slim Keyboard Driver Update
  • Correct Installshield installation issue.

  • Fixes the iPAQ device time-out while actively entering data via the keyboard.

  • Disabling the 5-way navigation button to avoid accidental activation when using the keyboard.
    Enhancements

  • Adds keyboard support for h3900 Series.
    Prerequisites

  • Microsoft Pocket PC 2002 or Microsoft Pocket PC 2003.
    Synchronization Software

  • Microsoft ActiveSync 3.5 or later.

    Installation

    HOW TO USE:

    1. Download the SoftPaq to a directory on your hard drive.The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.

    2. Establish an Activesync connection between your iPAQ Pocket PC and host PC.

    3. Execute the downloaded file and follow the on-screen instructions.

    4. Perform a normal reset on the iPAQ Pocket PC.

    Download HP iPAQ h5550 Firmware
    • Version: 1.27
    Public date: January 9, 2004
    HP iPAQ h5550 Firmware
    OS: n/a
    		 Description for HP iPAQ h5550 Firmware:

    HP iPAQ Pocket PC h5400/h5500 Series LEAP Support
  • Fixes WEP enabled Ad-Hoc connection problems.

  • Fixes Ad-Hoc communication problems between iPAQs.

  • Fixes connection problem when a device is left idle for a period of time, becomes disconnected, and has problems reconnecting.

  • Fixes Voice over IP performance.
    Enhancements

  • Changes the LEAP user interface to default to remember the password for the APs with the same SSID.
    Prerequisites

  • Microsoft ActiveSync 3.7 or later.
    Notes

  • LEAP (Cisco Lightweight Extensible Authentication Protocol) is supported in the system firmware and software for the h5400/h5500 iPAQ Pocket PC Series for customers whose network supports this feature. LEAP is wireless technology that is built on the 802.1x authentications for local area networks (LANs), which allows users to roam freely and not to be tied to any one specific domain or to the rotation of encrypted security keys. Customers can use their username and password as defined by the administrator.

  • To enable your device to use a Cisco LEAP enabled network, Please contact your Company’s IT Administrator for setup instructions.

  • For more information about the Cisco LEAP authentication protocol, Please visit the Cisco website at http://www.cisco.com/en/US/about/ac123/ac114/about_cisco_online_exclusive09186a00800a5cab.html for additional information.

    Synchronization Software

  • Microsoft ActiveSync 3.7 or later.
    Installation

    HOW TO USE:

    1. Download the SoftPaq to a directory on your hard drive.The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.

    2. Establish an ActiveSync connection between your iPAQ Pocket PC and host PC.

    3. Execute the downloaded file and follow the on-screen instructions to install the iPAQ Pocket PC h5400/h5500 Series LEAP Support.

    4. Perform a normal reset on the iPAQ Pocket PC.>/ol>

      Download HP iPAQ h5550 Firmware
    • Version: 3.2.2.123
    Public date: October 14, 2003
    HP iPAQ h5550 Firmware
    OS: n/a
    		 Description for HP iPAQ h5550 Firmware:

    HP iPAQ Pocket PC h5400/h5500 Series WLAN Driver Update
  • Fixes LEAP authentication issue with Funk Radius Server.

  • Fixes signal-strength indicator.

  • Fixes issue where memory is not reclaimed.
    Enhancements

  • Adds a feature that provides additional safety when updating wireless LAN firmware.

  • Adds feature that provides nine retries when roaming before indicating disconnect.
    Prerequisites

  • Microsoft ActiveSync 3.7 or later
    Notes

  • PURPOSE:
  • Recommended
  • OPERATING SYSTEM(S):
  • Microsoft Pocket PC 2003
    Synchronization Software

  • Microsoft ActiveSync 3.7 or later.
    Installation

    How To Use:

    1. Download the SoftPaq .EXE file to a directory on your hard drive.

    2. Establish an Activesync connection between your iPAQ Pocket PC and host PC.

    3. Execute the downloaded file and follow the on-screen instructions.

    4. Perform a normal reset on the iPAQ Pocket PC.

    Download HP iPAQ h5550 Firmware
    • Version: 3.2.4.133
    Public date: May 19, 2004
    HP iPAQ h5550 Firmware
    OS: n/a
    		 Description for HP iPAQ h5550 Firmware:

    HP iPAQ Pocket PC h5500 Series Wireless LAN Driver Update with WPA Support
    IMPORTANT: To function properly, this WPA-enabled wireless LAN driver requires that the following SoftPaqs be installed:
  • HP iPAQ Pocket PC h5500 Series ROM Update Version 1.10.
  • HP iPAQ Pocket PC h5500 Series Wireless LAN Firmware Update with WPA Support Version 1.103.5.164.
    Fixes

  • Corrects LEAP authentication issue with Funk Radius Server.
  • Corrects signal strength indicator.
  • Corrects issue where memory is not reclaimed.
    Enhancements

    NOTE: Driver functionality in this SoftPaq and the superseded SoftPaq, SP27588, is the same. Consequently, if you already downloaded and applied SoftPaq SP27588, you do not need to download and apply this SoftPaq. This SoftPaq was created to correct text in the release note.

  • Adds support for WPA.
  • Adds a feature that provides additional safety when updating wireless LAN firmware.
  • Adds a feature that provides nine retries when roaming before indicating disconnect.
    Prerequisites

    Important

    Before applying this wireless LAN firmware Update, both of the following Softpaqs must be installed:

    English

  • HP iPAQ Pocket PC h5500 Series ROM Update Version 1.10 (SoftPaq SP27674)

  • HP iPAQ Pocket PC h5500 Series Wireless LAN Firmware Update with WPA Support version 1.103.5.164 (SoftPaq SP27605)

    French

  • HP iPAQ Pocket PC h5500 Series ROM Update Version 1.10 (SoftPaq SP27684)

  • HP iPAQ Pocket PC h5500 Series Wireless LAN Firmware Update with WPA Support Version 1.103.5.164 (SoftPaq SP27598)

    German

  • HP iPAQ Pocket PC h5500 Series ROM Update Version 1.10 (SoftPaq SP27685)

  • HP iPAQ Pocket PC h5500 Series Wireless LAN Firmware Update with WPA Support version 1.103.5.164 (SoftPaq SP27599)
    Simplified Chinese
  • HP iPAQ Pocket PC h5500 Series ROM Update Version 1.10 (SoftPaq SP27683)
  • HP iPAQ Pocket PC h5500 Series Wireless LAN Firmware Update with WPA Support Version 1.103.5.164 (SoftPaq SP27597)
    Japanese
  • HP iPAQ Pocket PC h5500 Series ROM Update Version 1.10 (SoftPaq SP27687)
  • HP iPAQ Pocket PC h5500 Series Wireless LAN Firmware Update with WPA Support Version 1.103.5.164 (SoftPaq SP27601)
    Korean
  • HP iPAQ Pocket PC h5500 Series ROM Update Version 1.10 (SoftPaq SP27688)
  • HP iPAQ Pocket PC h5500 Series Wireless LAN Firmware Update with WPA Support Version 1.103.5.164 (SoftPaq SP27602)
    Brazilian Portuguese
  • HP iPAQ Pocket PC h5500 Series ROM Update Version 1.10 (SoftPaq SP27682)
  • HP iPAQ Pocket PC h5500 Series Wireless LAN Firmware Update with WPA Support Version 1.103.5.164 (SoftPaq SP27596)
  • Microsoft ActiveSync 3.7 or later
    Notes

  • This is an initial release.
  • PURPOSE:
  • Recommended
  • OPERATING SYSTEM(S):
  • Microsoft Pocket PC 2003
    Synchronization Software

  • Microsoft ActiveSync 3.7 or later
    Installation

    How To Use:
    1. Download the SoftPaq .EXE file to a directory on your hard drive.

    2. Establish an Activesync connection between your iPAQ Pocket PC and host PC.

    3. Execute the downloaded file and follow the on-screen instructions.

    4. Perform a normal reset on the iPAQ Pocket PC.

    Download HP iPAQ h5550 Firmware
    • Version: 4.3.5.414
    Public date: May 19, 2004
    HP iPAQ h5550 Firmware
    OS: n/a
    		 Description for HP iPAQ h5550 Firmware:

    HP iPAQ Pocket PC h5500 Series Wireless LAN Firmware Update
  • Adds a feature that provides additional safety when updating wireless LAN firmware. With the exception of the new safety feature, this wireless LAN firmware update provides the same functionality as the factory-installed wireless LAN firmware (version 100.5.39).
    Prerequisites

  • Microsoft ActiveSync 3.7 or later
  • Either HP iPAQ Pocket PC h5400/h5500 Series WLAN Driver Update Version 3.2.4.133, or HP iPAQ Pocket PC h5500 Series Wireless LAN Driver Update with WPA Support Version 4.3.5.414.
    Notes

  • This is an initial release.
  • PURPOSE:
  • Recommended
  • OPERATING SYSTEM(S):
  • Microsoft Pocket PC 2003
  • Important

    Before applying this wireless LAN firmware Update, one of the following Softpaqs must be installed:

  • English

  • Either HP iPAQ Pocket PC h5400/h5500 Series WLAN Driver Update Version 3.2.4.133 (SP27632).

  • or HP iPAQ Pocket PC h5500 Series Wireless LAN Driver Update with WPA Support Version 4.3.5.414 (SP27595).

  • French

  • HP iPAQ Pocket PC h5400/h5500 Series WLAN Driver Update Version 3.2.4.133 (SoftPaq SP27625)

  • HP iPAQ Pocket PC h5500 Series Wireless LAN Driver Update with WPA Support Version 4.3.5.414 (SoftPaq SP27588)

  • German

  • HP iPAQ Pocket PC h5400/h5500 Series WLAN Driver Update Version 3.2.4.133 (SoftPaq SP27626).

  • HP iPAQ Pocket PC h5500 Series Wireless LAN Driver Update with WPA Support Version 4.3.5.414 (SoftPaq SP27589).

  • Brazilian Portuguese
  • HP iPAQ Pocket PC h5400/h5500 Series WLAN Driver Update Version 3.2.4.133 (SoftPaq SP27623)
  • HP iPAQ Pocket PC h5500 Series Wireless LAN Driver Update with WPA Support Version 4.3.5.414 (SoftPaq SP27586)

  • Simplified Chinese
  • HP iPAQ Pocket PC h5400/h5500 Series WLAN Driver Update Version 3.2.4.133 (SoftPaq SP27624)
  • HP iPAQ Pocket PC h5500 Series Wireless LAN Driver Update with WPA Support Version 4.3.5.414 (SoftPaq SP27587)

  • Japanese
  • HP iPAQ Pocket PC h5400/h5500 Series WLAN Driver Update Version 3.2.4.133 (SoftPaq SP27628)
  • HP iPAQ Pocket PC h5500 Series Wireless LAN Driver Update with WPA Support Version 4.3.5.414 (SoftPaq SP27591)
  • Korean
  • HP iPAQ Pocket PC h5400/h5500 Series WLAN Driver Update Version 3.2.4.133 (SoftPaq SP27629)
  • HP iPAQ Pocket PC h5500 Series Wireless LAN Driver Update with WPA Support Version 4.3.5.414 (SoftPaq SP27592)
    Synchronization Software

  • Microsoft ActiveSync 3.7 or later
    Installation

    How To Use:

    1. Download the SoftPaq .EXE file to a directory on your hard drive.

    2. Establish an Activesync connection between your iPAQ Pocket PC and host PC.

    3. Execute the downloaded file and follow the on-screen instructions.

    4. Perform a normal reset on the iPAQ Pocket PC.

    Download HP iPAQ h5550 Firmware
    • Version: 0.103.5.41
    Public date: May 19, 2004
    HP iPAQ h5550 Firmware
    OS: n/a
    		 Description for HP iPAQ h5550 Firmware:

    HP iPAQ Pocket PC h5500 Series Wireless LAN Firmware Update with WPA Support
  • Adds a feature that provides additional safety when updating wireless LAN firmware.

  • Adds support for WPA.
    Prerequisites

    Important

    Before applying this wireless LAN firmware Update, one of the following Softpaqs must be installed:

    English

  • HP iPAQ Pocket PC h5500 Series ROM Update Version 1.10 (SoftPaq SP27674)

  • HP iPAQ Pocket PC h5500 Series Wireless LAN Driver Update with WPA Support Version 4.3.5.414 (SoftPaq SP27595)

    French

  • HP iPAQ Pocket PC h5500 Series ROM Update Version 1.10 (SoftPaq SP27684)

  • HP iPAQ Pocket PC h5500 Series Wireless LAN Driver Update with WPA Support Version 4.3.5.414 (SoftPaq SP27588)

    German

  • HP iPAQ Pocket PC h5500 Series ROM Update Version 1.10 (SoftPaq SP27685)

  • HP iPAQ Pocket PC h5500 Series Wireless LAN Driver Update with WPA Support Version 4.3.5.414 (SoftPaq SP27589)

    Brazilian Portuguese
  • HP iPAQ Pocket PC h5500 Series ROM Update Version 1.10 (SoftPaq SP27682)
  • HP iPAQ Pocket PC h5500 Series Wireless LAN Driver Update with WPA Support Version 4.3.5.414 (SoftPaq SP27586)
    Simplified Chinese
  • HP iPAQ Pocket PC h5500 Series ROM Update Version 1.10 (SoftPaq SP27683)
  • HP iPAQ Pocket PC h5500 Series Wireless LAN Driver Update with WPA Support Version 4.3.5.414 (SoftPaq SP27587)
    Japanese
  • HP iPAQ Pocket PC h5500 Series ROM Update Version 1.10 (SoftPaq SP27687)
  • HP iPAQ Pocket PC h5500 Series Wireless LAN Driver Update with WPA Support Version 4.3.5.414 (SoftPaq SP27591)
    Korean
  • HP iPAQ Pocket PC h5500 Series ROM Update Version 1.10 (SoftPaq SP27688)
  • HP iPAQ Pocket PC h5500 Series Wireless LAN Driver Update with WPA Support Version 4.3.5.414 (SoftPaq SP27592)
    Notes

  • PURPOSE:
  • Recommended
  • OPERATING SYSTEM(S):
  • Microsoft Pocket PC 2003
    Synchronization Software

  • Microsoft ActiveSync 3.7 or later
    Installation

    How To Use:

    1. Download the SoftPaq .EXE file to a directory on your hard drive.

    2. Establish an Activesync connection between your iPAQ Pocket PC and host PC.

    3. Execute the downloaded file and follow the on-screen instructions.

    4. Perform a normal reset on the iPAQ Pocket PC.

    Download HP iPAQ h5550 Firmware
    • Version: 1.103.5.164
    Public date: May 19, 2004
    HP iPAQ h5550 Firmware
    OS: n/a
    		 Description for HP iPAQ h5550 Firmware:

    802.1x Certificate Enrollment Tool for Pocket PC 2003
  • Enables support for blank user name and password.
  • Adds log file under File Explorer, My Device to help track problems.
    Prerequisites

  • Pocket PC 2003
  • Microsoft ActiveSync 3.7 or later
    Synchronization Software

  • Microsoft ActiveSync 3.7 or later
    Installation

    HOW TO USE:

    1. Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.

    2. Establish an Activesync connection between your iPAQ Pocket PC and host PC.

    3. Execute the downloaded file and follow the on-screen instructions to install the 802.1X Certificate Enrollment Tool.

    4. Perform a normal reset on the iPAQ Pocket PC.

    Download HP iPAQ h5550 Firmware
    • Version: 3.00
    Public date: February 2, 2004
    HP iPAQ h5550 Firmware
    OS: n/a
    		 Description for HP iPAQ h5550 Firmware:

    HP iPAQ Pocket PC h5400/h5500 LEAP Password Reset
  • Microsoft Pocket PC 2003.
    Notes

  • PURPOSE:
  • Routine
  • OPERATING SYSTEM(S):
  • Microsoft Pocket PC 2003
    Synchronization Software

  • Microsoft ActiveSync 3.7 or later
    Installation

    HOW TO USE:

    1. Download the SoftPaq .EXE file to a directory on your hard drive.

    2. Establish an Activesync connection between the iPAQ Pocket PC and host PC using either a USB or Serial connection.

    3. Execute the downloaded file and follow the on-screen instructions.

      NOTE: As part of the installation, a shortcut for the "Leap Password Reset.exe" application is placed on the Start menu under Programs.

    Download HP iPAQ h5550 Firmware
    • Version: 1.0.0.4
    Public date: July 19, 2004
    HP iPAQ h5550 Firmware
    OS: n/a
    		 Description for HP iPAQ h5550 Firmware:

    iPAQ Pocket PC 2003 Spanish DNS Editor
  • Resolves the Spanish Pocket PC 2003 modem connection setting where the OS was only allowing 2 digits to be entered for the DNS field instead of 3.
    Prerequisites

    OPERATING SYSTEM(S):

  • Microsoft Pocket PC 2003
    Synchronization Software

  • Microsoft ActiveSync 3.7 or later.
    Installation

    HOW TO USE:

    1. Download the SoftPaq to a directory on your hard drive.The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.

    2. Establish an Activesync connection between your iPAQ Pocket PC and host PC.

    3. Execute the downloaded file and follow the on-screen instructions to install the Spanish DNS Editor application.

    4. Perform a normal reset on the iPAQ Pocket PC.

    Download HP iPAQ h5550 Firmware
    • Version: 1.00
    Public date: October 17, 2003
    HP iPAQ h5550 Firmware
    OS: n/a
    		 Description for HP iPAQ h5550 Firmware:

    Pocket PC 2003 Terminal Services Client Reconnect Workaround
  • Resolves Terminal Services Client reconnect issue.
    Notes

  • PURPOSE:
  • Routine
  • OPERATING SYSTEM(S):
  • Microsoft Pocket PC 2003
    Synchronization Software

  • Microsoft ActiveSync 3.7 or later
    Installation

    HOW TO USE:
    1. Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.
    2. Establish an Activesync connection between your iPAQ Pocket PC and host PC.
    3. Execute the downloaded file and follow the on-screen instructions.
    4. Perform a normal reset on the iPAQ Pocket PC.

    Download HP iPAQ h5550 Firmware
    • Version: 1.00
    Public date: March 17, 2004
    HP iPAQ h5550 Firmware
    OS: n/a
    		 Description for HP iPAQ h5550 Firmware:

    HP iPAQ Pocket PC h5500 Series Bluetooth Manager Update
  • Updates Bluetooth Manager to the correct language.

  • Only installs on units with Brazilian language.
    Prerequisites

  • Brazilian Portuguese with ROM version 1.00.5.
    Synchronization Software

  • Microsoft ActiveSync 3.7 or later.
    Installation

    HOW TO USE:

    1. Download the SoftPaq to a directory on your hard drive.The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.

    2. Establish an ActiveSync connection between your iPAQ Pocket PC and host PC.

    3. Execute the downloaded file and follow the on-screen instructions.

    4. Perform a normal reset on the iPAQ Pocket PC.


    Download HP iPAQ h5550 Firmware
    • Version: 1.1
    Public date: October 16, 2003
     
    If you still had any questions concerning search, uploading or installations HP iPAQ h5550 driver, use our form of feedback. As far as possible we shall answer all your questions. For reception of more detailed information about HP iPAQ h5550 driver accessible to free download, choose the model of your device.
    Term of use :: Privacy Policy
    © 2005 Copyright DriverStock.com All right reserved