Free drivers  
 
Search free drivers:
Category:
Search keyword:


Driver Scan
Driver type:
 
Related drivers:
 
 
SUGGESTIONS:
If you are requiered for more information about HP iPAQ h5450 driver, follow links:
Search HP iPAQ h5450 driver at Google
Search HP iPAQ h5450 driver at Yahoo
 
 Information about drivers
Main page PDA drivers HP drivers HP iPAQ h5450 Firmware
 

HP iPAQ h5450 Firmware
  To start downloading the HP iPAQ h5450 driver, you must type the security code from the images and click "download". This page also contains information about HP iPAQ h5450 driver.
 
HP iPAQ h5450 Firmware
OS: n/a
 Description for HP iPAQ h5450 Firmware:

HP iPAQ Pocket PC h5400 Series ROM Update
  • Improves Virtual Memory utilization for both WLAN and Bluetooth Software
  • Updates Expansion Pack manager driver to support GSM/GPRS Wireless Pack
  • WLAN Software and driver improvements:
  • Improves WLAN performance
  • Adds LEAP authentication client support (requires firmware update, minimum version 0.100.5.39)
  • Reduces memory footprint
  • Improves IP address connection
  • Corrects lockup caused by multiple instances of UI
  • Adds support for NDIS OIDS to simplify connection manager
  • Allows co-existence between the WLAN utility and a Wireless connection
  • Corrects profile bug in WLAN for first time setup
  • Updates Fingerprint SW to prevent potential security problem
  • Adds support for Multicast
  • Enables an 802.11b connection with a WLAN Access Point that supports both 802.11b and 802.11g (requires firmware update, minimum version 0.100.5.39)
  • Updates Battery driver to improve battery performance
  • Updates ROM lock code to prevent ROM image from being written over improperly during debug (Developer issue)
  • Updates SD driver to support additional cards
  • Updates the bootloader to enable automatic flash mode entry during a ROM update

    KNOWN ISSUES:
  • When the WLAN is associated to an access point, the device will not disassociate and connect to another access point unless the device detects zero signal strength.
  • While the WLAN is connected to LEAP, 0.0.0.0 IP address may be reported but connection is still maintained.
  • Bluetooth "OBEX File Transfer" service displays invalid characters for German ROM
    Enhancements

  • This ROM Upgrade Utility supports Microsoft ActiveSync 3.7.1
  • Adds SDIO support
  • Updates IPSM driver to latest version
  • Updates iPAQ Image Viewer to latest version (display large picture files)
  • Updates iPAQ Backup to latest version
  • Updates iTASK to latest version
  • Updates Bluetooth Software (UI and Bluetooth ActiveSync improvements)
  • Updates Nevo Software components to enable web download

    This ROM version also contains the following previously released updates:
  • iPAQ Pocket PC h5400 Series ROM Update v1.10
  • iPAQ Pocket PC h5400 headset volume improvement
  • iPAQ Pocket PC h5400 Nevo Update
  • iPAQ Pocket PC h5400 Battery Driver
  • iPAQ Pocket PC h5400 WLAN Driver Update
    Prerequisites

  • Synchronization software such as Microsoft ActiveSync 3.5 or later
  • A WLAN firmware update, minimum version 0.100.5.39, is required for some of the enhancements and fixes.This firmware update will be available in a separate SoftPaq on www.hp.com on the support and drivers page. The WLAN firmware update must be installed AFTER installing this ROM update.DO NOT attempt to install the WLAN firmware update before installing this ROM update.
    Notes

  • A WLAN firmware update, minimum version 0.100.5.39, is required for some of the enhancements and fixes. This firmware update will be available in a separate SoftPaq on www.hp.com on the support and drivers page. The WLAN firmware update must be installed AFTER installing this ROM update.DO NOT attempt to install the WLAN firmware update before installing this ROM update.
    Synchronization Software

  • Microsoft ActiveSync 3.5 or later.
    Installation

    HOW TO USE:

    1. Download the SoftPaq to a directory on your hard drive.The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.
    2. Execute the downloaded file and follow the on-screen instructions to unpacking the ROM Update files to a directory (NOTE: this directory should not contain any file or folder from any previous ROM Upgrade).
    3. Establish an Activesync connection between your iPAQ Pocket PC and host PC through either the USB or Serial connection.
    4. Execute the RUU.exe file in the directory created in step 2 above to begin the upgrade process and follow the instructions displayed by the ROM Upgrade Utility.
    5. You may delete the self-extracting file downloaded in step 1 if you wish.

    INSTALLATION NOTES:

    1. During the update, the ROM Update Utility will:

    2. Query your device for current ROM image information.
    3. Validate that the new ROM image is compatible with your device.
    4. Allow you to back up your current ROM image.
    5. Automatically place the iPAQ in flash mode.
    6. Update or restore a ROM image on your device.
    7. Require that you press Reset at the end which performs a Full reset to complete the process.
    8. Important: Disable the standby and hibernation modes on your host PC. If standby or hibernation are activated during the upgrade process, a critical error may occur.
    9. Important: Plan for enough time to start and complete the update process.The total time to perform a ROM backup and a ROM update is estimated to be as follows:

      *USB - 20 minutes
      *Serial - 90 minutes
    10. Important: Do not interact with your device or remove it from AC power or the cradle/cable once the status bar appears on the iPAQ and the actual update has started.
    11. If an error message is displayed during the process, follow any available instructions to correct the condition and start the utility again.
    12. The update process can be performed while connected to a host PC as a Guest or with an established partnership.
    		•
    Version: 1.11.XX
    Public date: June 6, 2003
    Download DownloadDriver Updater Pro to get the most current drivers for your computer.


    In reasons of safety and security of our information, we ask you to type the checking code from the picture. We are sorry if we've made some inconveniences. To download the HP iPAQ h5450 Firmware (HP iPAQ Pocket PC h5400 Series ROM Update...), type checking code from the image to the form and click "download". The code is not case-sensitive and has 5 letters of the Latin alphabet and numbers (1-9, without 0). For read security code, please enable javascript and cookies.

    If we have helped you with search of your driver, you can help us, having put the link to us, from your site or to recommend our site to the friends.
    If you have found out mistakes of downloading HP iPAQ h5450 Firmware the driver, please inform us about it. We shall solve a problem as soon as possible.
    Term of use :: Privacy Policy
    © 2005 Copyright DriverStock.com All right reserved