Free drivers  
 
Search free drivers:
Category:
Search keyword:


Driver Scan
Driver type:
 
TOP DOWNLOADS:
 
 
SUGGESTIONS:
If you are requiered for more information about HP iPAQ h5150 driver, follow links:
Search HP iPAQ h5150 driver at Google
Search HP iPAQ h5150 driver at Yahoo
 
 Information about drivers
Main page PDA drivers HP drivers iPAQ h5150 driver
 

HP iPAQ h5150 driver

  There are HP iPAQ h5150 drivers available for free downloading on this page. Choose the driver you need according to your operating system. Be attentively, because some drivers for HP iPAQ h5150 can be used only with one operating system! The HP iPAQ h5150 drivers can differentiate in version. If you can't find it in this list, you can ask us to look for it. Also we recommend you to use our forum to discuss the driver problems arisen during the installation of the driver.
 
HP iPAQ h5150 Firmware
OS: n/a
 Description for HP iPAQ h5150 Firmware:

HP iPAQ Pocket PC h5100 Series Firmware Update
  • This XIP update is designed to replace the Miscellaneous OEM region of the ROM image. It is important to read and understand the information in the Readme.txt file included with this update BEFORE installing this SoftPaq.
    Fixes

  • Corrects the following problems by updating the Bluetooth Driver to Version 1.4.1.60:
  • Corrects issue where the system stopped responding when disconnecting a PAN connection using the Incoming Connection icon.
  • Corrects issue that caused the handheld to require a normal reset if the handheld was Powered Off during the transfer of data using SPP. For example, if the handheld was POwered Off while the it was connected to a Bluetooth GPS device.
  • Corrects issue where the proxy settings were erased in the Bluetooth settings.
  • Corrects issue where the "Dial via Bluetooth" option did not accept spaces in a the phone number.
  • Corrects issue where the handheld did not "wake up" to perform a scheduled iPAQ backup.
  • Corrects issue where the Dual-Slot PC Card Expansion Pack fails to initialize after a soft reset when two PCMCIA cards are installed.
  • Corrects the following issues with the SDIO Driver:
  • Corrects issue where some SDIO cards were not recognize after Suspend/Resume or soft reset.
  • Corrects issue where the handheld did not enter Suspend mode if select SDIO cards were present.
  • Corrects issue where some SDIO cards continued to draw power while in Suspend mode.
  • Corrects issue with the state of the serial DTR signal line after Suspend/Resume.
  • Corrects issue where open files on a storage card could not be accessed after Suspend/Resume.
    Enhancements

  • Updates IPSM to Version 3614.3212.
  • Updates iTask to Version 2.16.
  • Updates the iPAQ Image Viewer to Version 2.12b.
    Prerequisites

  • Microsoft ActiveSync 3.7 or later
    Notes

  • PURPOSE:
  • Recommended
  • OPERATING SYSTEM(S):
  • Microsoft Pocket PC 2003
    Synchronization Software

  • Microsoft ActiveSync 3.7 or later
    Installation

    HOW TO USE:

    1. Download the SoftPaq .EXE file to a directory on your hard drive.

    2. Establish an Activesync connection between the iPAQ Pocket PC and host PC using either a USB or Serial connection.

    3. Execute the downloaded file and follow the on-screen instructions.



    INSTALLATION NOTES:

    1. If the Regional Settings are changed to any language other than the default language of the handheld, the Firmware update will not complete and generate the following error message: "This update is language specific. Please visit the HP website to verify that you have downloaded the correct update.

    2. IMPORTANT: Please observe the following restrictions:
    3. Do not enable the handheld password feature during the update process.
    4. Do not attempt to Power Off or restart the handheld while the update is in progress.
    5. Do not enable "Show information when device is turned on" feature during the update process. To disable this feature, click "Owner" on the Today screen and uncheck the box at the bottom of the page, then click the Notes tab at the bottom of the page and uncheck "Show information when device is turned on," which is located at the bottom of the page.
    6. After applying a firmware (ROM) update, do not attempt to restore a backup that was made before the ROM update was installed.

    7. IMPORTANT: Disable the Standby and Hibernation modes on the host PC. If Standby or Hibernation mode is activated during the upgrade process, a critical error may occur.

    8. IMPORTANT: Plan enough time to complete the update process. The total time to perform the firmware update is estimated to be as follows:
    9. For USB connection - 10 minutes
    10. For Serial connection - 20 minutes

    11. IMPORTANT: Do not interact with the handheld or remove it from AC power or from the cradle/cable once the hourglass appears on the handheld and the actual firmware update has started.

    12. If an error message is displayed during the update process, follow any available instructions to correct the condition and start the update again.

    13. The update process can be performed while connected to a host PC either as a Guest or with an established partnership.

      NOTE: This XIP firmware update does not change the ROM version. To confirm that the XIP firmware update was successful, check the versions of the individual components by clicking Start, Settings, System, and Asset Viewer or by opening each individual application and checking the version number. If the update was successful, applications will show version numbers,
      as follows:

    14. Bluetooth Driver Version 1.4.1.60
    15. iPAQ Backup Software Version 1.1.0.6
    16. IPSM Version 3614.3212
    17. iTask Version 2.16
    18. iPAQ Image Viewer version 2.12b

    Download HP iPAQ h5150 Firmware
    • Version: 1.00.11
    Public date: July 15, 2004
    HP iPAQ h5150 Firmware
    OS: n/a
    		 Description for HP iPAQ h5150 Firmware:

    HP iPAQ Bluetooth Keyboard Driver Update
  • Microsoft ActiveSync 3.7 (or later).
    Notes

  • PURPOSE:
  • Routine
  • OPERATING SYSTEM(S):
  • Microsoft Pocket PC 2003
  • Microsoft Pocket PC 2003SE
    Installation

    HOW TO USE:
    1. Download the SoftPaq .EXE file to a directory on your hard drive.
    2. Establish an ActiveSync connection between the handheld and host PC.
    3. Execute the downloaded file and follow the on-screen instructions. If asked to replace a file, please choose "yes" or "yes to all".
      NOTE: Do not extract the files in the root directory. Use the default folder if possible.(C:\IPAQ\SP29865)
    4. When the installation is complete, perform a normal reset on the handheld.

    Download HP iPAQ h5150 Firmware
    • Version: 1.0.0.1
    Public date: February 23, 2005
    HP iPAQ h5150 Firmware
    OS: n/a
    		 Description for HP iPAQ h5150 Firmware:

    HP iPAQ Foldable Keyboard Driver Update
  • Adds support for the Microsoft Pocket PC 2003SE Operating System.
    Prerequisites

  • Microsoft Pocket PC 2002 or Microsoft Pocket PC 2003.
    Notes

  • PURPOSE:
  • Routine
  • OPERATING SYSTEM(S):
  • Microsoft Pocket PC 2002
  • Microsoft Pocket PC 2003
  • Microsoft Pocket PC 2003SE
    Synchronization Software

  • Microsoft ActiveSync 3.5 or later
    Installation

    HOW TO USE:
    1. Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.
    2. Establish an Activesync connection between your iPAQ Pocket PC and host PC.
    3. Execute the downloaded file and follow the on-screen instructions.
    4. Perform a normal reset on the iPAQ Pocket PC.

    Download HP iPAQ h5150 Firmware
    • Version: 4.03
    Public date: February 4, 2005
    HP iPAQ h5150 Firmware
    OS: n/a
    		 Description for HP iPAQ h5150 Firmware:

    HP Photosmart Mobile Camera Driver and iPAQ Image Zone
  • For the iPAQ Pocket PC h3900 Series with Pocket PC 2002, update the ROM to the latest version that has SDIO support in order for the camera to function properly.
    Notes

  • This is an initial release.
    Synchronization Software

  • Microsoft ActiveSync 3.5 or later
    Installation

    HOW TO USE:

    1. Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.

    2. Establish an Activesync connection between your iPAQ Pocket PC and host PC.

    3. Execute the downloaded file and follow the on-screen instructions.

    4. Perform a normal reset on the iPAQ Pocket PC.

    Download HP iPAQ h5150 Firmware
    • Version: 1.00.01
    Public date: January 8, 2004
    HP iPAQ h5150 Firmware
    OS: n/a
    		 Description for HP iPAQ h5150 Firmware:

    iPAQ Slim Keyboard Driver Update
  • Correct Installshield installation issue.

  • Fixes the iPAQ device time-out while actively entering data via the keyboard.

  • Disabling the 5-way navigation button to avoid accidental activation when using the keyboard.
    Enhancements

  • Adds keyboard support for h3900 Series.
    Prerequisites

  • Microsoft Pocket PC 2002 or Microsoft Pocket PC 2003.
    Synchronization Software

  • Microsoft ActiveSync 3.5 or later.

    Installation

    HOW TO USE:

    1. Download the SoftPaq to a directory on your hard drive.The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.

    2. Establish an Activesync connection between your iPAQ Pocket PC and host PC.

    3. Execute the downloaded file and follow the on-screen instructions.

    4. Perform a normal reset on the iPAQ Pocket PC.

    Download HP iPAQ h5150 Firmware
    • Version: 1.27
    Public date: January 9, 2004
    HP iPAQ h5150 Firmware
    OS: n/a
    		 Description for HP iPAQ h5150 Firmware:

    iPAQ Pocket PC 2003 Spanish DNS Editor
  • Resolves the Spanish Pocket PC 2003 modem connection setting where the OS was only allowing 2 digits to be entered for the DNS field instead of 3.
    Prerequisites

    OPERATING SYSTEM(S):

  • Microsoft Pocket PC 2003
    Synchronization Software

  • Microsoft ActiveSync 3.7 or later.
    Installation

    HOW TO USE:

    1. Download the SoftPaq to a directory on your hard drive.The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.

    2. Establish an Activesync connection between your iPAQ Pocket PC and host PC.

    3. Execute the downloaded file and follow the on-screen instructions to install the Spanish DNS Editor application.

    4. Perform a normal reset on the iPAQ Pocket PC.

    Download HP iPAQ h5150 Firmware
    • Version: 1.00
    Public date: October 17, 2003
    HP iPAQ h5150 Firmware
    OS: n/a
    		 Description for HP iPAQ h5150 Firmware:

    Pocket PC 2003 Terminal Services Client Reconnect Workaround
  • Resolves Terminal Services Client reconnect issue.
    Notes

  • PURPOSE:
  • Routine
  • OPERATING SYSTEM(S):
  • Microsoft Pocket PC 2003
    Synchronization Software

  • Microsoft ActiveSync 3.7 or later
    Installation

    HOW TO USE:
    1. Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.
    2. Establish an Activesync connection between your iPAQ Pocket PC and host PC.
    3. Execute the downloaded file and follow the on-screen instructions.
    4. Perform a normal reset on the iPAQ Pocket PC.

    Download HP iPAQ h5150 Firmware
    • Version: 1.00
    Public date: March 17, 2004
     
    If you still had any questions concerning search, uploading or installations HP iPAQ h5150 driver, use our form of feedback. As far as possible we shall answer all your questions. For reception of more detailed information about HP iPAQ h5150 driver accessible to free download, choose the model of your device.
    Term of use :: Privacy Policy
    © 2005 Copyright DriverStock.com All right reserved