|
| SUGGESTIONS: |
|
If you are requiered for more information about HP Evo N1000c driver, follow links:
|
|
| |
HP Evo N1000c driver |
|
| |
There are HP Evo N1000c drivers available for free downloading on this page.
Choose the driver you need according to your operating system. Be attentively, because some drivers for
HP Evo N1000c can be used only with one operating system!
The HP Evo N1000c drivers can differentiate in version. If you can't find it in this list, you can ask us to look for it. Also we recommend you to
use our forum to discuss the driver problems arisen during the installation of the driver.
|
| |
 |
HP Evo N1000c Video driver |
|
OS: Windows XP Home Edition
|
Description for HP Evo N1000c Video driver:
CPQFlash Utility for Presario 1500/Evo N1000c/v (68P4C ROM)
Corrects issue where L1 cache showed only 16kb instead of 20kb in F10 Setup.
Enhancements
Updates new PXE boot agent 4.1.09.
Supports new 32-byte serial number format.
Adds support for all Intel D1 stepping processors.
Installation
HOW TO USE:
- Download the SoftPaq to a temporary,empty directory on your hard drive.The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.
- From that drive and directory, execute the downloaded file and follow the on-screen instructions.
- After the system has been shutdown, you may delete all temporary files and the SoftPaq file downloaded in step 1.
IMPORTANT: DO NOT TURN OFF POWER TO THE COMPUTER WHILE PERFORMING THIS PROCEDURE!
Download HP Evo N1000c Video driver
|
Version: F.0D A
|
Public date: May 23, 2003
|
|
|
|
HP Evo N1000c Video driver |
|
OS: Windows XP Home Edition
|
Description for HP Evo N1000c Video driver:
Keyboard Controller Firmware Update for Notebooks - DOS-Bootable Diskette
IMPORTANT:DO NOT TURN OFF POWER TO THE COMPUTER WHILE PERFORMING THIS PROCEDURE!
Notes
PURPOSE:RecommendedOPERATING SYSTEM(S):Microsoft Windows 2000Microsoft Windows XP Home Edition (32-bit)Microsoft Windows XP Professional (32-bit)
Installation
HOW TO USE:- Obtain a formatted 1.44-MB diskette.
- Download the SoftPaq .EXE file to a temporary directory on your hard drive.
- Execute the downloaded file and follow the on-screen instructions. When prompted, insert the formatted diskette in a drive to create the bootable
diskette.
NOTE: After the diskette has been created, the SoftPaq .EXE file downloaded in Step 2 can be deleted, if desired.
- Power Off the notebook.
- Place the newly created ROMPaq Diskette in Drive A: and Power On the notebook. Follow the on-screen instructions to upgrade the KBC firmware.
Download HP Evo N1000c Video driver
|
Version: 15.29
|
Public date: August 16, 2005
|
|
|
|
HP Evo N1000c Video driver |
|
OS: Windows XP Home Edition
|
Description for HP Evo N1000c Video driver:
ROM Image for Presario 1500/Evo N1000c/v (68P4C) Remote ROM Flash
Corrects issue where L1 cache showed only 16kb instead of 20kb in F10 Setup.
Enhancements
Updates new PXE boot agent 4.1.09.
Supports new 32-byte serial number format.
Adds support for all Intel D1 stepping processors.
Installation
HOW TO USE:
IMPORTANT: DO NOT TURN OFF POWER TO THE COMPUTER WHILE PERFORMING THIS PROCEDURE!
- Download the SoftPaq to a temporary, empty directory on your hard drive. The file downloaded is a self-extracting executable with a
filename based on the SoftPaq Number above.
- The BIOS/ROM image file must be used with Remote Management Software in order to actually flash (upgrade) the ROM image on one of the affected Presario/Evo notebooks.
- When used with SSM, copy the SoftPaq to the file store.
- When used with WINFLASH, run the SoftPaq to get the .cab file.
Download HP Evo N1000c Video driver
|
Version: F.0D A
|
Public date: May 23, 2003
|
|
|
|
HP Evo N1000c Video driver |
|
OS: Windows XP Home Edition
|
Description for HP Evo N1000c Video driver:
ROMpaq for Presario 1500/Evo N1000c/Evo N1000v (68P4C ROM)
Corrects issue where L1 cache showed only 16kb instead of 20kb in F10 Setup.
Enhancements
Updates new PXE boot agent 4.1.09.
Supports new 32-byte serial number format.
Adds support for all Intel D1 stepping processors.
Installation
HOW TO USE:
IMPORTANT: DO NOT TURN OFF POWER TO THE COMPUTER WHILE PERFORMING THIS PROCEDURE!
- Obtain a formatted 1.44-MB diskette.
- Download the SoftPaq to a directory on your hard drive and change to that directory.The file that is downloaded is an executable with a filename based on the SoftPaq Number above.
- From that drive and directory, execute the downloaded file and follow the on-screen instructions.You will be prompted to insert the formatted diskette in a drive to create the diskette.
- After the diskette has been created, you may delete the SoftPaq file downloaded in step 2.
- Turn off the computer.
- Place the newly created Compaq Presario 1500/Evo N1000c/Evo N1000v ROMPaq Diskette in Drive A: and turn on the computer. Follow the instructions on the screen
to upgrade the System ROM.
Download HP Evo N1000c Video driver
|
Version: F.0D A
|
Public date: May 23, 2003
|
|
|
|
HP Evo N1000c Audio driver |
|
OS: Windows XP Home Edition
|
Description for HP Evo N1000c Audio driver:
ADI Soundmax Audio Driver
This is an initial release.
Installation
- Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.
- Execute the downloaded file and follow the on-screen instructions.
Entering "Y" to confirm the unpacking of files creates a new directory folder in the download directory.All files are unpacked into this newly created directory.
- After the directory has been created, you may delete the self-extracting file downloaded in step 1.
- To silent install, run with the /k switch from the command prompt.For example, enter: "path"\SETUP -s
where "path" is the drive and directory created in step 2
- After the installation is completed, you may delete the directory created in step 2 if you wish.
Download HP Evo N1000c Audio driver
|
Version: 1.00 A
|
Public date: July 29, 2002
|
|
|
|
HP Evo N1000c Audio driver |
|
OS: Windows XP Home Edition
|
Description for HP Evo N1000c Audio driver:
ADI Soundmax Audio Driver for Windows 2000/XP
Fixes problem where AC3 stream noise was heard from front channel after selecting and then de-selecting.
Fixes problem where the S/PDIF output would become enabled for PCM streams when the PCM check box on the mixer panel was not selected.
Fixes problem where Windows 2000 users could not record from Wave Out Mix on ALI platforms.
Fixes problem where noise was heard during ADI audio driver installation process. This affected computers with Windows XP and ALI M1535+ chipsets, and was independent of CODEC.
Fixes problem where users could no longer continuously record after wave player had stopped.
Fixes problem where the right channel would not mute when the slider for Microphone was moved to the bottom position.
Fixes problem where "Driver Update" did not work properly when the name of a new INF file was different from the one already installed.
Installation
HOW TO USE:
- Download the SoftPaq to a directory on your hard drive.
- Execute the downloaded file and follow the on-screen instructions.
Download HP Evo N1000c Audio driver
|
Version: 5.12.01.3920
|
Public date: March 3, 2004
|
|
|
|
HP Evo N1000c Video driver |
|
OS: Windows XP Home Edition
|
Description for HP Evo N1000c Video driver:
ATI Video Driver and Control Panel
Corrects issue where SoftPaq SP26097 was not automatically installing the driver and control panel.
Corrects path statement in [DETAILFILEINFORMATION] section of CVA file.
Corrects issue where Clone Mode Options button was not showning on the Overlay Options tab.
Corrects issue where WinDVD player stopped responding and sometimes generated an error when changing resolution during video playback.
Enhancements
Resolution can be changed up to 2048x1536 under Display Properties, Settings tab.
After installation, the Desktop Help window pops up and ATI icon is shown in system tray.
Theatre mode is available under the Overlay Tab.
Notes
NOTE:
The driver binaries are the same as in SoftPaq SP26097 (Version 7.96-031113A-012783C). SoftPaq SP26097 was not automatically installing the driver and control panel. SoftPaq SP27431 fixes that issue by revising the INF files, which is the reason for the
higher version number.
PURPOSE:
Recommended
OPERATING SYSTEM(S):
Microsoft Windows XP Home
Microsoft Windows XP Professional
Microsoft Windows 2000
Installation
HOW TO USE:
- Download the SoftPaq .EXE file to a directory on your hard drive.
- Execute the downloaded file and follow the on-screen instructions.
Download HP Evo N1000c Video driver
|
Version: 7.96-031113A 014164C
|
Public date: March 18, 2004
|
|
|
|
HP Evo N1000c Video driver |
|
OS: Windows XP Home Edition
|
Description for HP Evo N1000c Video driver:
ATI Video Driver and Control Panel
Fixes issue where hot key display switching did not "remember" the resolution.
Fixes issue where an external VGA monitor did work properly when connected via S-Video+VGA.
Fixes issue where AVI or MPEG files caused the system to stop responding (lockup) after disabling the extended monitor.
Fixes issue where display configuration was changed after system restart with external monitor connected.
Fixes issue where pressing Fn+F4 to switch display while a media file was playing caused "system busy" error.
Fixes issue where user could not force TV on when TV was not automatically detected.
Fixes issue where user could not change display to CRT+TV by pressing Fn+F4 at first cycle.
Fixes issue where user could not use Fn+F4 to switch between TV and internal display.
Fixes issue where CRT was not detected after Suspend/Resume or use of lid switch.
Fixes Compaq Presario 2800 Series power management issue that caused a "blue screen" error.
Enhancements
Adds support for 1280x768 resolution for HP Compaq Business Notebook models nc8000 and nc6000.
Adds the following REGISTRY keys for all ASICS (if not already there):Control Panel - Overlay Page - Show New Overlay Tab.
Control Panel - Troubleshoot button - Show Troubleshoot button
DAL - Mapping LCD and CRT on same Controller - Restrict Mapping
Dual TV-Output - Enable Dual TV-Output
NOTE: When Dual TV-Output is enabled, both S-Video and Composite are enabled.
Overlay Theater Mode - Supported, Initially off
Control Panel - NoTheaterMode
NOTE: Removes "Theater Mode" radio button.
Prerequisites
When using Insight Client Manager, SoftPaq Number SP28356, "Insight Management Agent for Clients," (or later) should be installed before installing this SoftPaq.
Notes
PURPOSE:RecommendedOPERATING SYSTEM(S):Microsoft Windows XP Home EditionMicrosoft Windows XP ProfessionalMicrosoft Windows 2000
Installation
HOW TO USE:
- Download the SoftPaq .EXE file to a directory on your hard drive.
- Execute the downloaded file and follow the on-screen instructions.
Download HP Evo N1000c Video driver
|
Version: 8.003.3-040515A 0160
|
Public date: June 14, 2004
|
|
|
|
HP Evo N1000c Video driver |
|
OS: Windows XP Home Edition
|
Description for HP Evo N1000c Video driver:
Radeon M7 Video Driver for Microsoft Windows XP
This is an initial release.
Installation
HOW TO USE
- Download the SoftPaq .EXE file to a directory on your hard drive.
- Run the SoftPaq and follow the on-screen instructions.
Download HP Evo N1000c Video driver
|
Version: 1.00 B
|
Public date: June 12, 2002
|
|
|
|
HP Evo N1000c Video driver |
|
OS: Windows XP Home Edition
|
Description for HP Evo N1000c Video driver:
Compaq Notebooks Synaptics Touchpad Driver
Corrects intermittent computer lockup.
Notes
It is highly recommended that the System ROM of the Evo 610c be upgraded to Version F.12 or later when it becomes available in SoftPaq SP24238 in late April, 2003, for the best stability of this driver upgrade.
Installation
HOW TO USE:
- Download the SoftPaq to a directory on your hard drive. The file that is downloaded is an executable with a filename based on the SoftPaq Number above.
- Run the downloaded SoftPaq file via Windows Explorer.
- Restart the notebook when the installation has been completed.
Switches Provided:
"-s":For silent installation of the application without dialog screens or prompts for user intervention.
Example: From the Start, Run --
(Path to softpaq directory)\setup.exe -s
Download HP Evo N1000c Video driver
|
Version: 7.00 C
|
Public date: July 17, 2003
|
|
|
|
HP Evo N1000c Video driver |
|
OS: Windows XP Home Edition
|
Description for HP Evo N1000c Video driver:
Easy Access Buttons Software
Modifies device driver to support Windows XP with Service Pack-1
Installation
HOW TO USE:
- Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.
- Execute the downloaded file and follow the on-screen instructions.
Download HP Evo N1000c Video driver
|
Version: 3.00 D
|
Public date: June 4, 2003
|
|
|
|
HP Evo N1000c Video driver |
|
OS: Windows XP Home Edition
|
Description for HP Evo N1000c Video driver:
Agere V.92 Modem Driver for Windows XP
Installs driver version 8.30.
Installation
HOW TO USE:
- Download the SoftPaq .EXE file to a directory on your hard drive.
- Execute the downloaded file and follow the on-screen instructions.
- After the files are unpacked, the Setup program will run automatically. The setup program (Setup.exe) is located in the download directory if it needs to be run manually.
Download HP Evo N1000c Video driver
|
Version: 1.00 F
|
Public date: December 16, 2003
|
|
|
|
HP Evo N1000c Video driver |
|
OS: Windows XP Home Edition
|
Description for HP Evo N1000c Video driver:
Conexant 56K ACLink Modem Driver for Windows XP
Improves connectivity in China.
Resolves connectivity issues with certain RAS equipment.
Enhancements
Conexant driver version 6.02.05
Installation
HOW TO USE:
- Download the SoftPaq to a directory on your hard drive and change to that directory.The file that is downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.
- From that drive and directory, execute the downloaded file and follow the on-screen instructions to unpack the files. The number of files to be created and total file size is displayed. You will be given the chance to specify the target directory for the files, or default to the download directory.
- After the files have been unpacked, you may delete the self-extracting file downloaded in step 1.
- The modem driver will be installed automatically after the files unpack.
- If you need to install the modem drivers manually, run SETUP2180.EXE -wa1 for the installed Operating System from the drive and directory path chosen in step 2. For example, use the task bar to select Start, then Run.
Enter:
(path)\SETUP2180.EXE -wa1 (i.e. C:\TEMP\SETUP2180.EXE -wa1)
Select OK and follow on-screen instructions.
Download HP Evo N1000c Video driver
|
Version: 3.00 B
|
Public date: February 23, 2004
|
|
|
|
HP Evo N1000c Video driver |
|
OS: Windows XP Home Edition
|
Description for HP Evo N1000c Video driver:
Conexant HSFi V92 MiniPCI Modem Drivers
Includes support for Net Waiting / Modem On Hold when connected to a V.92 server (see NOTE below about the Net Waiting V.92 feature).
Notes
This SoftPaq support Microsoft Windows XP.
Installation
HOW TO USE:
- Download the SoftPaq to a directory on your hard drive and change to that directory.The file that is downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.
- From that drive and directory, execute the downloaded file and follow the on-screen instructions to unpack the files. The number of files to be created and total ile size is displayed. You will be given the chance to specify the target directory for the files,
or default to the download directory.
- After the files have been unpacked, you may delete the self-extracting file downloaded in step 1.
- The Softpaq will automatically upgrade the modem driver when it finishes unpacking files. Follow the directions shown on the screen.
NOTE for the Net Waiting V.92 feature:The install process will automatically update the Net Waiting software if an older version is already installed on the system.If you do not have Net Waiting installed on your system and want to install the new version,
go to the location where the softpaq unbundled the installation files and run SETUP.EXE (the Net Waiting setup program) located in the \NW directory.
Manual Installation:
=====================
If the modem driver is not automatically updated or if you want to manually update the modem driver, follow the instructions below:
- The Softpaq will create the following directory structure in the directory where it is unpacked.
\install.cmd
\modem
\NW
- When the Softpaq finishes unpacking it will automatically install the modem drivers.If the user wants to do this manually in the future, the command "install.cmd" should be run.(This is the file the softpaq executes on exit). For example, use the task bar to select Start, then Run.
Enter:
(path)\install.cmd
Select OK and follow on-screen instructions.
Download HP Evo N1000c Video driver
|
Version: 2.00 C
|
Public date: June 13, 2003
|
|
|
|
HP Evo N1000c Video driver |
|
OS: Windows XP Home Edition
|
Description for HP Evo N1000c Video driver:
EMEA GPRS Multiport Plug and Play Driver for Windows 2000/XP
This is an initial release.
Installation
HOW TO USE:
- Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.
- Execute the downloaded file and follow the on-screen instructions.
Download HP Evo N1000c Video driver
|
Version: 2.0.1.1 A
|
Public date: October 16, 2002
|
|
|
|
HP Evo N1000c Video driver |
|
OS: Windows XP Home Edition
|
Description for HP Evo N1000c Video driver:
EMEA Mobile PhoneTools Update for GPRS Multiport
This is an initial release.
Installation
HOW TO USE:
- Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.
- Execute the downloaded file and follow the on-screen instructions.
Download HP Evo N1000c Video driver
|
Version: 1.0.0.0 A
|
Public date: November 20, 2002
|
|
|
|
HP Evo N1000c Video driver |
|
OS: Windows XP Home Edition
|
Description for HP Evo N1000c Video driver:
Compaq 802.11b Multiport Module Software for Windows XP
Vendor Version 1.5.22.1
Installation
HOW TO USE:
- Download the SoftPaq to a directory on your hard drive and change to that directory.The file that is downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.
- From that drive and directory, execute the downloaded file and follow the on-screen instructions to unpack the files. You will be given the chance to specify the target directory for the files, or default to the download directory.
- After the files have been unpacked, you may delete the self-extracting file downloaded in step 1.
- Read the file UPGRADE.TXT for installation instructions.
Download HP Evo N1000c Video driver
|
Version: 2.00 B
|
Public date: October 18, 2002
|
|
|
|
HP Evo N1000c Video driver |
|
OS: Windows XP Home Edition
|
Description for HP Evo N1000c Video driver:
Compaq Wireless LAN Multiport W200 Driver for Windows 2000/XP
Corrects a delivery problem with previous SoftPaq SP25972.
Enhancements
Adds WPA suport.
Installation
HOW TO USE:
- Download the SoftPaq to a directory on your hard drive and change to that directory.The file that is downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.
- From that drive and directory, execute the downloaded file and follow the on-screen instructions to unpack the files. You will be given the chance to specify the target directory for the files, or default to the download directory.After the program finishes unpacking the files, the driver setup program will be run automatically in silent mode to install the drivers.
- After the files have been unpacked, you may delete the self-extracting file downloaded in step 1.
- If you want to run the driver setup program interactively, run the Setup.exe program in the directory the driver files were unpacked.
Download HP Evo N1000c Video driver
|
Version: 1.00 E
|
Public date: February 21, 2004
|
|
|
|
HP Evo N1000c Video driver |
|
OS: Windows XP Home Edition
|
Description for HP Evo N1000c Video driver:
Mobile Intel PRO/100 NIC Drivers
5.41.34.40 NDIS5 Windows XP drivers
Installation
HOW TO USE:
- Download the SoftPaq to a directory on your hard drive and change to that directory.The file that is downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.
- From that drive and directory, execute the downloaded file and follow the on-screen instructions to unpack the files.You will be given the chance to
specify the target directory for the files, or default to the download directory.
- After the files have been unpacked, you may delete the self-extracting file downloaded in step 1.
Windows XP NIC DRIVER INSTALLATION (Default Menu Settings):
-- For FIRST TIME installation of the NIC drivers
- If prompted by the New Hardware Wizard, point to the drive and directory path chosen in step 2. For example, Enter: \Net82557.INF (i.e. C:\TEMP\Network\Net82557.INF)
- Select OK and follow on-screen instructions.
-- For UPDATE to a newer version of the NIC drivers
- Select start, then control panel.
- Double click "Network and Internet Connection".
- Select the "Network Connection" Icon.
- Double Click the "Local Area Network" Icon.
- Select the "Configure" button.
- Select the "Driver" tab.
- Select the "Update Driver" button, then select Next.
- Select "Install From A LIST...", then select Next
- When prompted, select "Include this location in the search".
- Browse to or type in the directory path, then select "Next"
- Select the Intel PRO/100 network adapter from the device list, select Next
- Continue to follow on-screen instructions until Finished
- Close network adapter properties, and Control Panel
Download HP Evo N1000c Video driver
|
Version: 3.02 A
|
Public date: June 13, 2003
|
|
|
|
HP Evo N1000c Video driver |
|
OS: Windows XP Home Edition
|
Description for HP Evo N1000c Video driver:
Support Software for Bluetooth MultiPort Module by Compaq
Adds HCRP Support.
Adds PAN Support.
Prerequisites
Bluetooth MultiPort Module by Compaq (Compaq Part Number 234209-001)
Notes
This SoftPaq supports Microsoft Windows XP.
Purpose
Routine
Operating System(s)
Microsoft Windows XP 32-bit Home
Microsoft Windows XP 32-bit Professional
Installation
How To Use
- Download the SoftPaq .EXE file to a directory on your hard drive.
- Execute the downloaded file and follow the on-screen instructions.
Download HP Evo N1000c Video driver
|
Version: 3.00 B
|
Public date: August 17, 2004
|
|
|
|
HP Evo N1000c Video driver |
|
OS: Windows XP Home Edition
|
Description for HP Evo N1000c Video driver:
HP Mobile Printing for Notebooks
Adds new Properties button.
Remembers previously selected options for each printer.
Makes System tray icon optional.
Adds support for new models.
Notes
Re-released to show support for new Tablet PC models.
Installation
HOW TO USE:
- Download the SoftPaq to a directory on your hard drive.The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.
- Execute the downloaded file and follow the on-screen instructions.Entering "Y" to confirm the unpacking of files creates a new directory folder in the download directory.All files are unpacked into this newly created directory.
- After the directory has been created, you may delete the self-extracting file downloaded in step 1.
- To silent install, run with the noIcon noDP quiet pilog switches from the command prompt.For example, enter: (path)\SETUP noIcon noDP quiet pilog where (path) is the drive and directory created in step 2.
- After the installation is completed, you may delete the directory created in step 2 if you wish.
Download HP Evo N1000c Video driver
|
Version: 2.10 C
|
Public date: November 8, 2003
|
|
|
|
HP Evo N1000c Video driver |
|
OS: Windows XP Home Edition
|
Description for HP Evo N1000c Video driver:
Keyboard Controller Firmware Update for Presario 1500/Evo N1000c/Evo N1000v
Corrects issue where charger LED would blink when a fully charged Korean made cell was inserted.
Installation
HOW TO USE:
- Obtain a formatted 1.44-MB diskette.
- Download the SoftPaq to a directory on your hard drive and change to that directory.The file that is downloaded is an executable with a filename based on the SoftPaq Number above.
- From that drive and directory, execute the downloaded file and follow the on-screen instructions.You will be prompted to insert the formatted diskette in a drive to create the diskette.
- After the diskette has been created, you may delete the SoftPaq file downloaded in step 2.
- Turn off the computer.
- Place the newly created KBC ROM update diskette in Drive A: and turn on the computer.
IMPORTANT: DO NOT TURN OFF POWER TO THE COMPUTER WHILE PERFORMING THIS PROCEDURE!
Download HP Evo N1000c Video driver
|
Version: 15.27 A
|
Public date: August 20, 2003
|
|
|
|
HP Evo N1000c Video driver |
|
OS: Windows XP Home Edition
|
Description for HP Evo N1000c Video driver:
Notebooks Hitachi DK23CA-xx Hard Drive Firmware Update Utility Version A0J2
Resolves noise-related issues.
Prerequisites
Hitachi DK23CA-20 or DK23CA-30 model hard drive
To determine your hard drive model, open Windows Device Manager and look in the Disk Drives folder. The hard drive manufacturer and model will be listed there.
Installation
HOW TO USE:
- Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.
- Execute the downloaded file and follow the on-screen instructions.
- The softpaq contains both a utility to create a bootable diskette or a bootable CD.
- Launch the QRSTBATCH.BAT file to create the diskette
-OR-
Use the included HFW_A0J2.ISO file to burn a bootable CD using a CD-R/RW drive and CD Writer software.
Download HP Evo N1000c Video driver
|
Version: 1.01
|
Public date: July 7, 2003
|
|
|
|
HP Evo N1000c Video driver |
|
OS: Windows XP Home Edition
|
Description for HP Evo N1000c Video driver:
HP Notebook LidSwitch Policy
Fixes issue where DC power scheme timeout values were copied to AC timeout values if computer was booted on DC power.
Enhancements
Adds support for new notebook models as well as some older notebooks.
Prerequisites
Installation requires administrative rights.
Notes
Purpose: Routine
Operating System(s):
Microsoft Windows XP Home Edition
Microsoft Windows XP Professional
Microsoft Windows 2000
Installation
HOW TO USE:
- Download the SoftPaq .EXE file to a directory on your hard drive.
- Execute the downloaded file and follow the on-screen instructions.
Download HP Evo N1000c Video driver
|
Version: 2.02 A
|
Public date: May 14, 2004
|
|
|
|
HP Evo N1000c Video driver |
|
OS: Windows XP Home Edition
|
Description for HP Evo N1000c Video driver:
System Enhancements Disk for Windows XP
Installs registry fix to enable S3 wake.
Enhancements
Includes SMSC Floppy driver.
Includes Samsung Floppy driver.
Installs Banias processor files.
Installs OCA.mrk file used for customer support.
Notes
The System Enhancements Disk will no longer install the USB 2.0 driver.To install the latest USB 2.0 driver, please download Service Pack 1 or later from the Microsoft website.
Installation
HOW TO USE:
- Download the Softpaq executable file to the local hard drive.
- Run the Softpaq executable file and follow on-screen instructions to complete the installation.
Download HP Evo N1000c Video driver
|
Version: 3.00 E
|
Public date: March 4, 2003
|
|
|
|
HP Evo N1000c Video driver |
|
OS: Windows XP Home Edition
|
Description for HP Evo N1000c Video driver:
Mobile PhoneTools for Multiport GPRS Module
Optimizes communication resources for SMS management.
Notes
This is an initial release.
Installation
HOW TO USE:
- Download the SoftPaq .EXE file to a directory on your hard drive.
- Execute the downloaded file and follow the on-screen instructions.
Download HP Evo N1000c Video driver
|
Version: 2.00 A
|
Public date: November 3, 2003
|
|
|
|
HP Evo N1000c Audio driver |
|
OS: Windows XP Home Edition
|
Description for HP Evo N1000c Audio driver:
InterVideo WinDVD Player
Corrects issue where Application Picker offered two WinDVD options.
Corrects issue where setting a bookmark at beginning of a DVD title caused audio to mute and stay muted.
Installation
HOW TO USE:
- Download the SoftPaq .EXE file to a directory on your hard drive.
- Execute the downloaded file and follow the on-screen instructions.
Download HP Evo N1000c Audio driver
|
Version: 3.2.41.146
|
Public date: January 17, 2003
|
|
|
|
HP Evo N1000c Video driver |
|
OS: Windows XP Home Edition
|
Description for HP Evo N1000c Video driver:
Help and Support Center
Fixes localization issues.
Fixes installation issues.
Enhancements
Provides improved user interface.
Prerequisites
Help and Support Center version 3.0 (or later) is required.
Notes
PURPOSE:RoutineOPERATING SYSTEM(S):Microsoft Windows XP Home Edition (32-bit)Microsoft Windows XP Professional (32-bit)Microsoft Windows XP Tablet PC EditionNOTE:Installation of this SoftPaq is expected to take approximately 10 to 15 minutes.
Installation
HOW TO USE:- Download the SoftPaq .EXE file to a directory on your hard drive.
- Execute the downloaded file and follow the on-screen instructions.
Download HP Evo N1000c Video driver
|
Version: 4.1 H
|
Public date: August 23, 2005
|
|
|
|
HP Evo N1000c Video driver |
|
OS: Windows XP Home Edition
|
Description for HP Evo N1000c Video driver:
Compaq Notebooks 3-Mode Floppy Driver for Windows 2000/XP (Japanese)
Improvements to Readme.txt file.
Installation
HOW TO USE:
- Download the SoftPaq .EXE file to a directory on your hard drive.
- Run the SoftPaq and follow the on-screen instructions to unpack the files to c:\compaq\SP21029
- Refer to Japanese README.TXT for INF install.
Download HP Evo N1000c Video driver
|
Version: 1.00 B
|
Public date: July 29, 2002
|
|
|
|
HP Evo N1000c Video driver |
|
OS: Windows XP Home Edition
|
Description for HP Evo N1000c Video driver:
Diagnostics for Windows
Adds support for new models, including new HP Compaq Business Notebook models
Notes
Purpose:
RecommendedOperating Systems:
Microsoft Windows 95
Microsoft Windows 98
Microsoft Windows NT 4.0
Microsoft Windows 2000
Microsoft Windows Millennium Edition (ME)
Microsoft Windows XP Home Edition
Microsoft Windows XP Professional
Microsoft Windows Server 2003
Installation
HOW TO USE:
- Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above.
- Execute the downloaded file and follow the on-screen instructions.
To create the four optional installation diskettes, run MAKEDISK.BAT and follow on-screen instructions.
- To install Interactively:
a) Delete all previous versions of Diagnostics for Windows 1.xx. Since the DFW 1.xx is a 16-bit application that does not have an uninstall, simply delete the
C:\WINDOWS\CPQDIAG directory.
b) Remove all previous versions of Diagnostics for Windows 2.xx.
- Select Start, Settings, Control Panel
- Select Add/Remove Programs
- Select Compaq Diagnostics for Windows and "Add/Remove"
- delete the C:\WINDOWS\CPQDIAG directory if it still exists
c) Install this version of Diagnostics for Windows
- Insert diskette #1 into drive A: if installing from optional diskettes
- Run A:\SETUP.EXE or \SETUP.EXE where is directory from step 2
- Select Next
- Select Finish
- After the installation is completed, you may delete the directory created in step 2 if you wish.
Download HP Evo N1000c Video driver
|
Version: 4.12 A
|
Public date: March 8, 2004
|
|
|
|
HP Evo N1000c Video driver |
|
OS: Windows XP Home Edition
|
Description for HP Evo N1000c Video driver:
HP Client Management Interface Software Provider
Microsoft Windows Management Instrumentation (WMI) support is required.
Windows Scripting Host 5.6 (or later) is required.
Notes
PURPOSE:RoutineOPERATING SYSTEM(S):Microsoft Windows 2000Microsoft Windows XP Home Edition (32-bit)Microsoft Windows XP Professional (32-bit)
Installation
HOW TO USE:- Download the SoftPaq .EXE file to a directory on your hard drive.
| | |
Home
SiteMap
Testimonials
Forum
Links
Contact us
